Inventor General

Reply
Contributor
hhls11
Posts: 24
Registered: ‎06-18-2012
Message 1 of 3 (350 Views)
Accepted Solution

Possible to create section view of single component in a Presentation file?

350 Views, 2 Replies
06-18-2012 09:19 AM

I'm in the process of creating an exploded view of an assembly. I'm having to do this in a presentation file, and I was wondering if it was possible to section one of the parts in the exploded view. To be more specific, I have the majority of my parts spread out around another assembly in the center of the page. I want to get a three quarter section view of the center assembly so the internals are visible. Is this possble from within a presentation file and if so, how can it be done?

 

Thanks in advance for your help!

Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
*Expert Elite*
Curtis_Waguespack
Posts: 2,775
Registered: ‎03-08-2006
Message 2 of 3 (343 Views)

Re: Possible to create section view of single component in a Presentation file?

06-18-2012 10:09 AM in reply to: hhls11

Hi hhls11, 

 

You can do this using a Break Out view.

 

You'll need two other views to set this up. You can move those views outside of the title block or to another sheet if you don't want to see them on the final drawing.

 

To create the profile sketch you need to select the side view first, then use the Create Sketch button. Selecting the view first associates the sketch to the view.

 

To create the depth sketch you need to select the end view first, then use the Create Sketch button and add a line at the depth you want the break out cut to terminate.

 

When you have the sketches set up in your views,  you can use the Break Out tool on the side view. If you project an isometric view from the side view it will inherit the break out.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

Autodesk Inventor Section Exploded View1.png

 

Autodesk Inventor Section Exploded View2.png



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Contributor
hhls11
Posts: 24
Registered: ‎06-18-2012
Message 3 of 3 (297 Views)

Re: Possible to create section view of single component in a Presentation file?

06-19-2012 01:32 PM in reply to: Curtis_Waguespack

I appreciate the how-to. This will work just fine. 

 

Although this solution works for me, I did want to clarify that I was wanting to get this view while in the presentation file (.ipn) and not a drawing file.

 

Thanks again!

Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube