Parts disappear in idw view

[Anonymous]

I have a large assembly with about 120 parts plus fasteners. In the
assembly, all seems to be ok. When we first made the idw, all views seemed
to be ok. But then we began updating drawings with a new title block, and on
sheet 8 of this particular idw, 10 to 15 of the major parts are not there.
If you look at the hierarchy, they do not even exist there. However they are
still present in the assembly used to make this view. Any ideas??

Rodney Mishmash
Portec, Inc.
Flomaster Division

[Anonymous]

This sounds like a g/card problem, do you have a certified g/card and certified drivers and the latest reg hack ?
http://www.inventor-certified.com/graphics/

Can you post your computer's specs

--
P4, 1.9 GHz
1.5Gb RAM, 4Gb page
Win X/P sp2 [all hotfixes]
AIS 9 sp4
Vault 3
Nvidia Quadro4 980 XGL
(Bios 4.28.20.33.01) (Drv. 7.7.5.6)

--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs



"Iceman81005" wrote in message news:4984247@discussion.autodesk.com...
I have a large assembly with about 120 parts plus fasteners. In the
assembly, all seems to be ok. When we first made the idw, all views seemed
to be ok. But then we began updating drawings with a new title block, and on
sheet 8 of this particular idw, 10 to 15 of the major parts are not there.
If you look at the hierarchy, they do not even exist there. However they are
still present in the assembly used to make this view. Any ideas??

Rodney Mishmash
Portec, Inc.
Flomaster Division

[R.Corriveau]

"If you look at the hierarchy, they do not even exist there."

You mean in the browser of the idw?
Even when you expand the assembly under the pertinent view.?
What version of IV?
Could it be a design view rep?

[Anonymous]

yes we have a certified graphics card and the latest driver and reg
settings.
---
Hp xw6200
Xeon 2.8 GHz
1.0Gb RAM, 4Gb page
Win X/P sp2 [all hotfixes]
AIS 9 sp4
ATI FireGL V3100
Drv 6.14.10.6521
---
Rodney

"Duncan Anderson" wrote in
message news:4984657@discussion.autodesk.com...
This sounds like a g/card problem, do you have a certified g/card and
certified drivers and the latest reg hack ?
http://www.inventor-certified.com/graphics/

Can you post your computer's specs

--
P4, 1.9 GHz
1.5Gb RAM, 4Gb page
Win X/P sp2 [all hotfixes]
AIS 9 sp4
Vault 3
Nvidia Quadro4 980 XGL
(Bios 4.28.20.33.01) (Drv. 7.7.5.6)

--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and
proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs



"Iceman81005" wrote in message
news:4984247@discussion.autodesk.com...
I have a large assembly with about 120 parts plus fasteners. In the
assembly, all seems to be ok. When we first made the idw, all views seemed
to be ok. But then we began updating drawings with a new title block, and on
sheet 8 of this particular idw, 10 to 15 of the major parts are not there.
If you look at the hierarchy, they do not even exist there. However they are
still present in the assembly used to make this view. Any ideas??

Rodney Mishmash
Portec, Inc.
Flomaster Division

[Anonymous]

Yes in the browser of the idw.
Even when the assembly is expanded under the pertinent view.
IV9 SP4
I guess it could be a design view issue, but I didn't think we created any
specific design views. I will need to learn more about design views.

Rodney


wrote in message news:4984747@discussion.autodesk.com...
"If you look at the hierarchy, they do not even exist there."

You mean in the browser of the idw?
Even when you expand the assembly under the pertinent view.?
What version of IV?
Could it be a design view rep?