Inventor General

Reply
*Peteter
Message 1 of 3 (39 Views)

Part origin

39 Views, 2 Replies
11-25-2002 11:34 PM
In the customer-files is my part file r13-toggle-base, that was imported
from MDT6. Origin of this part is out in space and I do not know how to move
it. I want this part to be positioned in Isometric view upright. Help is
greatly appreciated.

peter
*Love, Jeff
Message 2 of 3 (39 Views)

Re: Part origin

11-25-2002 11:55 PM in reply to: *Peteter
I believe you will have to edit the base sketch coordinate system to get it
lined up.
You could also project the Center Point to the sketch, then move the sketch
objects to the projected Center Point to get everything lined up with the
origin (or at least get it closer).

That's about all I can think of based on the info you gave. I don't mess
with this too much, so not sure how easy/hard this will be.

"Peteter" wrote in message
news:4EF9B491606E7F1003CDE7AF56DD5FF7@in.WebX.maYIadrTaRb...
> In the customer-files is my part file r13-toggle-base, that was imported
> from MDT6. Origin of this part is out in space and I do not know how to
move
> it. I want this part to be positioned in Isometric view upright. Help is
> greatly appreciated.
>
> peter
>
>
*KJohnson
Message 3 of 3 (39 Views)

Re:

11-26-2002 12:01 AM in reply to: *Peteter
Hit F4 and space. You want a box with arrows to appear. Click on the
arrows until the part is the orientation you want. Don't exit RMB and
select set isometric.

Kathy Johnson

"Jeff Love" wrote in message
news:BA31AFC17A0C58C84B66B680810B5C38@in.WebX.maYIadrTaRb...
> I believe you will have to edit the base sketch coordinate system to get
it
> lined up.
> You could also project the Center Point to the sketch, then move the
sketch
> objects to the projected Center Point to get everything lined up with the
> origin (or at least get it closer).
>
> That's about all I can think of based on the info you gave. I don't mess
> with this too much, so not sure how easy/hard this will be.
>
> "Peteter" wrote in message
> news:4EF9B491606E7F1003CDE7AF56DD5FF7@in.WebX.maYIadrTaRb...
> > In the customer-files is my part file r13-toggle-base, that was imported
> > from MDT6. Origin of this part is out in space and I do not know how to
> move
> > it. I want this part to be positioned in Isometric view upright. Help is
> > greatly appreciated.
> >
> > peter
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube