Move by constraint and copy part

[Anonymous]

Hi all!

in the Customer Files Section i've uploaded a file under the same Subject.
The Problem: I want to move the Angle-Constraint "MOVE" in Part "Bahn.ipt"
the Part that moves "sprosse:1". each Degree I want a copy of the Part
Sprosse.ipt in the Assembly. When the Angle ist 360° then i have 360 Parts
each at one Degree.

Has Somebody an idea?

Thnx!

Juergen

PS: Sorry for my funny English 😉

[Anonymous]

I haven't looked at the file yet, but it sounds like you should be able to do a circular
array of Sprosse.ipt

--
Kent
Assistant Moderator
Autodesk Discussion Forum Moderator Program


"Jürgen Wagner" wrote in message
news:7F3AEC3062ED4CA3876D61542431AD64@in.WebX.maYIadrTaRb...
> Hi all!
>
> in the Customer Files Section i've uploaded a file under the same Subject.
> The Problem: I want to move the Angle-Constraint "MOVE" in Part "Bahn.ipt"
> the Part that moves "sprosse:1". each Degree I want a copy of the Part
> Sprosse.ipt in the Assembly. When the Angle ist 360° then i have 360 Parts
> each at one Degree.
>
> Has Somebody an idea?
>
> Thnx!
>
> Juergen
>
> PS: Sorry for my funny English 😉
>
>

[Anonymous]

Hi Kent,

if I do a circualar Array the Part(s) Sprosse don't have the right position
because the Arrayfunction don't consider of the constraints. if you want,
look at the Files then you see what i mean.

Juergen

"Kent Keller" schrieb im Newsbeitrag
news:B8B54DC8D3E3A584EA220A84E4C55AD6@in.WebX.maYIadrTaRb...
> I haven't looked at the file yet, but it sounds like you should be able to
do a circular
> array of Sprosse.ipt
>
> --
> Kent
> Assistant Moderator
> Autodesk Discussion Forum Moderator Program
>
>
> "Jürgen Wagner" wrote in message
> news:7F3AEC3062ED4CA3876D61542431AD64@in.WebX.maYIadrTaRb...
> > Hi all!
> >
> > in the Customer Files Section i've uploaded a file under the same
Subject.
> > The Problem: I want to move the Angle-Constraint "MOVE" in Part
"Bahn.ipt"
> > the Part that moves "sprosse:1". each Degree I want a copy of the Part
> > Sprosse.ipt in the Assembly. When the Angle ist 360° then i have 360
Parts
> > each at one Degree.
> >
> > Has Somebody an idea?
> >
> > Thnx!
> >
> > Juergen
> >
> > PS: Sorry for my funny English 😉
> >
> >
>
>

[Anonymous]

Sorry, I did go look at the part and unfortunately I don't have any good answers. I
imagine it could be done with a vba routine, but it would probably take as long to write
that as it would to do what you want manually.

--
Kent
Assistant Moderator
Autodesk Discussion Forum Moderator Program


"Jürgen Wagner" wrote in message
news:477242F77ECAD25CB2D68F61E19F6B64@in.WebX.maYIadrTaRb...
> Hi Kent,
>
> if I do a circualar Array the Part(s) Sprosse don't have the right position
> because the Arrayfunction don't consider of the constraints. if you want,
> look at the Files then you see what i mean.
>
> Juergen