Inventor General

Reply
Active Contributor
brandonherrer14
Posts: 27
Registered: ‎02-20-2012
Message 1 of 7 (291 Views)

Loft help

291 Views, 6 Replies
05-11-2012 04:55 PM

Hello all

 

In the file i attached, i wanted to know how to loft it so it is one surface and then thicken it to .3 in

 

Thank You

 

Brandon

Distinguished Contributor
rajeshindi
Posts: 141
Registered: ‎12-07-2009
Message 2 of 7 (274 Views)

Re: Loft help

05-12-2012 02:06 AM in reply to: brandonherrer14

Hi Buddy,

saw your surfaces and sketch.  But, it doesnt really tell me what exactly you want to do.  can you do a pencil sketch or a picture or something to know what you want to do.

*Expert Elite*
JDMather
Posts: 26,186
Registered: ‎04-20-2006
Message 3 of 7 (271 Views)

Re: Loft help

05-12-2012 04:02 AM in reply to: brandonherrer14

I noticed that your first sketch is unconstrained.

I recommend you start here http://home.pct.edu/~jmather/skillsusa%20university.pdf

did you notice all of the error warnings in your browser (yellow triangles), I would start over from scratch.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
brandonherrer14
Posts: 27
Registered: ‎02-20-2012
Message 4 of 7 (210 Views)

Re: Loft help

05-17-2012 08:38 AM in reply to: JDMather

Okay i have redone it. This i believe does not have any error messages/traingles. I have attached it to this message.

*Expert Elite*
JDMather
Posts: 26,186
Registered: ‎04-20-2006
Message 5 of 7 (198 Views)

Re: Loft help

05-17-2012 09:52 AM in reply to: brandonherrer14

I assume you are still working with this

http://forums.autodesk.com/t5/Autodesk-Inventor/curvy-chair-help/m-p/3454630#M434628

It would have been better to keep this all in one thread.

 

I would do just a bit differently.

First thing I would do is take a picture looking directly down on the chair and one loooking directly from front.

Place each one of these as images into sketches and then scale the images to the (approximate) size of the chair. (there will be some parallax error - so don't worry about getting perfect)

 

Then I would do the sketches for the loft.

My sketches would be a bit different than yours, and often it is best to go a bit beyond the finished size and then trim back to the finished size.

 

Chair.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
brandonherrer14
Posts: 27
Registered: ‎02-20-2012
Message 6 of 7 (167 Views)

Re: Loft help

05-23-2012 08:43 AM in reply to: JDMather

I attached the pictures of the top and the front

*Expert Elite*
JDMather
Posts: 26,186
Registered: ‎04-20-2006
Message 7 of 7 (156 Views)

Re: Loft help

05-23-2012 09:21 AM in reply to: brandonherrer14

You need to put those two images into your Inventor file on the first two sketches and figure out how to scale them to actual size (more or less - keep in mind that you can't get this perfect because of parallax error.

I'll let you work on it a bit and then come back and show you how I would do it if you have trouble.

 

(You might do the Vacuum tutorial in my signature for reference to see an example using images.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube