Inventor General

Reply
Contributor
Posts: 24
Registered: ‎06-18-2012
Message 1 of 4 (256 Views)

Is it possible to create a weld build up around a part?

256 Views, 3 Replies
10-05-2012 07:31 AM

I'm starting with a tube and want to add a weld build up around the OD on both ends. I mainly want to do this so that when I create a sectioned view on a drawing, you can see the difference in hatching between the original tube and the weld build up. I've had to create sketches on the drawing up to this point, but that's kind of a hassle. Is there any way of doing this? 

 

The photo I've attached shows the tube and shape of the weld build up. the green line is where I would like the tube OD to be, and the weld build up would be everything above that.

 

I'm using Inventor Pro 2013.

 

Thanks in advance.

Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
Distinguished Contributor
Ryan.Martinez
Posts: 126
Registered: ‎07-29-2011
Message 2 of 4 (238 Views)

Re: Is it possible to create a weld build up around a part?

10-05-2012 07:59 AM in reply to: hhls11

Call it out with a note?

Product Design Suite 2014
*Expert Elite*
Posts: 871
Registered: ‎02-16-2006
Message 3 of 4 (236 Views)

Re: Is it possible to create a weld build up around a part?

10-05-2012 07:59 AM in reply to: hhls11

Not sure without trying but the split tool may give you what you want.

If not use a very thin cut to give an edge.

Valued Mentor
japike
Posts: 322
Registered: ‎02-06-2004
Message 4 of 4 (226 Views)

Re: Is it possible to create a weld build up around a part?

10-05-2012 08:18 AM in reply to: harco

Add the weld build up to your part as a new solid body.

Peace,
Jeff
Inventor 2013

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube