Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
My company has asked me to find information on what and where is the best
places for Inventor training. I was wondering if you guys/gals could give
me some ideas.
"Dustin Conklin" wrote in message
news:0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb...
> My company has asked me to find information on what and where is the best
> places for Inventor training. I was wondering if you guys/gals could give
> me some ideas.
>
> Thanks
> Dustin
>
>
"Jason" wrote in message
news:68B833CD05856EF36FF1F8EEB3EAF59C@in.WebX.maYIadrTaRb...
> where are you located?
>
>
> "Dustin Conklin" wrote in message
> news:0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb...
> > My company has asked me to find information on what and where is the
best
> > places for Inventor training. I was wondering if you guys/gals could
give
> > me some ideas.
> >
> > Thanks
> > Dustin
> >
> >
>
>
We're in Indiana, that might be a bit far for you.... 🙂
Dennis
Dustin Conklin wrote:
> Central Michigan
>
> "Jason" wrote in message
> news:68B833CD05856EF36FF1F8EEB3EAF59C@in.WebX.maYIadrTaRb...
> > where are you located?
> >
> >
> > "Dustin Conklin" wrote in message
> > news:0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb...
> > > My company has asked me to find information on what and where is the
> best
> > > places for Inventor training. I was wondering if you guys/gals could
> give
> > > me some ideas.
> > >
> > > Thanks
> > > Dustin
> > >
> > >
> >
> >
--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk University Instructor
Autodesk ASC
(260-432-9695 x 221
my suggestion would be INCAT. i've trained there for MDT and more recently for IV4, IV5. planning on going for an update on IV6 soon. they have training areas all over the country. novi may be a good choice for you. http://www.incat.com -Joe
I am near Detroit, and I have taken the INCAT classes in Novi. They are pretty good. However, I have found that the Getting Started tutorials on the install, plus Sean Dotson's tutorials, plus the FAQ and all links found in that and this Newsgroup are all that I have needed. I do recommend the Essentials Book, too. Keep the $500 a person. Just my 2 cents worth.
I have been using Inventor since ver 4. I was wondering where could I go
to learn the VBA side of Inventor.
thanks
Dustin
"Jason" wrote in message
news:68B833CD05856EF36FF1F8EEB3EAF59C@in.WebX.maYIadrTaRb...
> where are you located?
>
>
> "Dustin Conklin" wrote in message
> news:0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb...
> > My company has asked me to find information on what and where is the
best
> > places for Inventor training. I was wondering if you guys/gals could
give
> > me some ideas.
> >
> > Thanks
> > Dustin
> >
> >
>
>
No really, search that group for posts from Brian about training. He has had classes in
the past available to consumers, and their would be no one better to learn from IMO.
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Dustin Conklin" wrote in message
news:39DD228BC26DAE8A668EC8782F37F54B@in.WebX.maYIadrTaRb...
> I have been using Inventor since ver 4. I was wondering where could I go
> to learn the VBA side of Inventor.
>
> thanks
> Dustin
> I have been using Inventor since ver 4. I was wondering where could I go
> to learn the VBA side of Inventor.
>
> thanks
> Dustin
>
> "Jason" wrote in message
> news:68B833CD05856EF36FF1F8EEB3EAF59C@in.WebX.maYIadrTaRb...
> > where are you located?
> >
> >
> > "Dustin Conklin" wrote in message
> > news:0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb...
> > > My company has asked me to find information on what and where is the
> best
> > > places for Inventor training. I was wondering if you guys/gals could
> give
> > > me some ideas.
> > >
> > > Thanks
> > > Dustin
> > >
> > >
> >
> >
--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk University Instructor
Autodesk ASC
(260-432-9695 x 221
In article <0E77EF09EB7670364901FBB673806973@in.WebX.maYIadrTaRb>, dconklin@powellfab.com
says...
> My company has asked me to find information on what and where is the best
> places for Inventor training. I was wondering if you guys/gals could give
> me some ideas.
>
> Thanks
> Dustin
Try IMAGINiT Technologies / Rand Worldwide, which is the largest Autodesk reseller . The
adresses is to be found on the link below.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")