Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Inventor Sheet Metal Issue.

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
prajwal
402 Views, 3 Replies

Inventor Sheet Metal Issue.

Hello Everyone, I am making this 3d Model out of Sheet metal but I am having a problem finishing it. On the very bottom of the part, I want the red and the green surface to be parallel to the Y-axis on both sides. The sketch "Desired Geometry" shows what I am trying to make. I tried using corner seam but it gives me error. The distance between the two red surface can vary. Any suggessions on how this shape can be acheived which will give me a correct flat pattern too.

 

Thank You

3 REPLIES 3
Message 2 of 4
chad38
in reply to: prajwal

Why not just create as a face? Maybe I'm missing what you're wanting to do. Take a look at what I did here and tell me if this is what you were going for.

HP Z420 Workstation
Intel Xeon CPU E5-1603 0 @ 2.80 GHz 2.80 GHz
12.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Solid Edge ST9 MP1

Inventor Professional 2015
Autocad 2015
SolidWorks 2015
Message 3 of 4
prajwal
in reply to: chad38

Thank You. It was exactl what I was looking for.

Message 4 of 4
chad38
in reply to: prajwal

Great, glad to help.

HP Z420 Workstation
Intel Xeon CPU E5-1603 0 @ 2.80 GHz 2.80 GHz
12.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Solid Edge ST9 MP1

Inventor Professional 2015
Autocad 2015
SolidWorks 2015

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report