Inventor General

Reply
Contributor
Posts: 13
Registered: ‎10-23-2012
Message 1 of 14 (964 Views)

Inventor Pro. 2013 constantly crashing

964 Views, 13 Replies
10-23-2012 03:43 AM

Is anyone lese having any problems with Inventor constanly crashing, mainly in the drawing environment, but also in the modeling environment? it isn't a repeatable fault either, it happens after around 4/5 hours of use. And no matter how many times I send in a crash report, send the model to Autodesk for inspection I get no feedback or a solution.

 

This is very frustrating, deadlines are starting to be missed as I just can't get on with work and I'm having to redo vast amounts of work now. I never had this problem with Solidworks or Creo. My PC is over spec'd so there is no issue with the PC.

*Expert Elite*
mcgyvr
Posts: 6,378
Registered: ‎12-01-2004
Message 2 of 14 (942 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:20 AM in reply to: andyb

andyb wrote:
My PC is over spec'd so there is no issue with the PC.

Are all your drivers up to date? Are you submitting the crash reports?

Have you run memtest?

 

have you loaded all the service packs/hotfixes?

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2014 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Contributor
Posts: 13
Registered: ‎10-23-2012
Message 3 of 14 (936 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:26 AM in reply to: mcgyvr

Hi

 

I've just been told about the new service pack 1.1 which has been released today. I checked yesterday and nothing was available. So I'll give this a go. The other "hotfixes" that I applied never worked.

 

All drivers are up to date (its a new PC and all updates applied).

 

I'm not sure what a memtest is.

 

As a foot note, I'm not impressed with this release. Everything seems to be running very slow, bolted connections, frame gen, vault upload/download's. A lot of fixes are needed to bring it up to speed with 2011.

Distinguished Contributor
Posts: 166
Registered: ‎03-20-2006
Message 4 of 14 (932 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:28 AM in reply to: andyb

Hello,

 

Did you perform some test without the antivirus?

*Expert Elite*
mcgyvr
Posts: 6,378
Registered: ‎12-01-2004
Message 5 of 14 (928 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:33 AM in reply to: andyb

andyb wrote:

Hi

 

All drivers are up to date (its a new PC and all updates applied).

 

I'm not sure what a memtest is.

 

As a foot note, I'm not impressed with this release. Everything seems to be running very slow, bolted connections, frame gen, vault upload/download's. A lot of fixes are needed to bring it up to speed with 2011.


Just because your computer is new and does Windows updates does NOT mean its drivers are all up to date.

Heck my last computer before this one was a brand new HP and the bios was 3 years old/out dated so much it didn't even support the dual processors it had properly.

 

Post your computer specs (including graphics card and driver version)..

 

Memtest checks your computers RAM sticks for problems.. RAM goes bad or has errors OFTEN..even on a newer computer.. I was having some crashes a while back and it turned out I just had a bad stick of RAM.. Got a new stick put in and crashes stopped.

 

 

 

 

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2014 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
mrattray
Posts: 2,210
Registered: ‎09-13-2011
Message 6 of 14 (917 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:37 AM in reply to: andyb

1) Save often.
2) Reboot every few hours. (I reboot during lunch time and when I leave for the day so I don't have to wait for it)

Mike (not Matt) Rattray

Contributor
Posts: 13
Registered: ‎10-23-2012
Message 7 of 14 (912 Views)

Re: Inventor Pro. 2013 constantly crashing

10-23-2012 07:42 AM in reply to: mcgyvr

No I have checked & updated every driver as well. 

 

I've just had a stall again (which doesn't obviously generate a crash report). This is with SP1.1 installed

 

Computer Spec is:-

 

Dell Precision T3600

Intel Xeon CPU E5-1620, 3.6GHz

Windows 7, 64-bit, SP1

16GB RAM

1TB SATA HDD

AMD Firepro V590

 

 

I'll try a memory test.

Contributor
Posts: 13
Registered: ‎10-23-2012
Message 8 of 14 (867 Views)

Re: Inventor Pro. 2013 constantly crashing

10-24-2012 06:47 AM in reply to: andyb

An update to my problem. I installed SP1.1 yesterday. I've run the prgram from 8.30 this morning and had a crash around 14.30 this afternoon. Really is annoying me now.

Distinguished Contributor
Posts: 219
Registered: ‎02-03-2009
Message 9 of 14 (855 Views)

Re: Inventor Pro. 2013 constantly crashing

10-24-2012 07:44 AM in reply to: andyb

1-2 crash per day is very very normal :smileyhappy:

*Expert Elite*
mrattray
Posts: 2,210
Registered: ‎09-13-2011
Message 10 of 14 (845 Views)

Re: Inventor Pro. 2013 constantly crashing

10-24-2012 09:17 AM in reply to: richiesuk

richiesuk wrote:

1-2 crash per day is very very normal :smileyhappy:


That's what ctrl+s is for.

 

Mike (not Matt) Rattray

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube