Inventor General

Reply
*Expert Elite*
blair
Posts: 3,934
Registered: ‎11-13-2006
Message 21 of 44 (454 Views)

Re: Inventor 2014 Release date??

04-18-2013 02:37 AM in reply to: jameslovell4987
It took about 3 hrs to download from home without any problems. It would have been quicker at work.

All 35.9Gb of it.
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
Active Contributor
jameslovell4987
Posts: 43
Registered: ‎03-24-2011
Message 22 of 44 (452 Views)

Re: Inventor 2014 Release date??

04-18-2013 02:48 AM in reply to: blair

lucky you! :smileyhappy:

 

slow.jpg

 

I've currently got 1Mb/s :smileysad:

 

fancy supplying me a private link!? :smileyvery-happy:

 

 

Regards,

James Lovell
Windows 7 Professional (64-Bit)
Dell T5600 - Xeon E3-2687W 8(16) Core CPU
16GB ECC RAM, 2GB Quadro 4000, 256GB SSD
Autodesk Product Design Suite Ultimate 2015
Active Contributor
jameslovell4987
Posts: 43
Registered: ‎03-24-2011
Message 23 of 44 (439 Views)

Re: Inventor 2014 Release date??

04-18-2013 03:31 AM in reply to: jameslovell4987

Oh :smileyhappy: thats better... got an email saying my media has been shipped :smileyhappy:

 

 

Regards,

James Lovell
Windows 7 Professional (64-Bit)
Dell T5600 - Xeon E3-2687W 8(16) Core CPU
16GB ECC RAM, 2GB Quadro 4000, 256GB SSD
Autodesk Product Design Suite Ultimate 2015
Community Manager
camilo.lemos
Posts: 901
Registered: ‎09-28-2011
Message 24 of 44 (412 Views)

Re: Inventor 2014 Release date??

04-18-2013 04:27 AM in reply to: jameslovell4987

Hi all, 

 

We are aware of the very slow download speeds as well as interruptions when downloading certain products. Our Subscription Center and download teams are looking into this as a top priority.

 

Best regards,



Camilo Lemos
*Expert Elite*
mcgyvr
Posts: 6,646
Registered: ‎12-01-2004
Message 25 of 44 (395 Views)

Re: Inventor 2014 Release date??

04-18-2013 05:17 AM in reply to: camilo.lemos

camilo.lemos wrote:

Hi all, 

 

We are aware of the very slow download speeds as well as interruptions when downloading certain products. Our Subscription Center and download teams are looking into this as a top priority.

 

Best regards,


 

tell them to fix the "Install Now" dropdown box too.. When I try to expand it to select "Download" I have to use the scroll bar because anything in the dropdown is below the screen.. Then you pull the scroll bar down and the dropdown box closes.. It is impossible for me to select "download"..

see attached picture..

 

edit...I was able to hack the pages css locally with firebug and expand the maindiv section to allow me to select download.. Of course I also figured out that I can't use the mouse to pull the scroll bar down but can acces the button if I use the arrow keys to cause the window to scroll.  I think if they just set overflow x to auto the problem would be solved instead of hidden

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Active Contributor
jameslovell4987
Posts: 43
Registered: ‎03-24-2011
Message 26 of 44 (387 Views)

Re: Inventor 2014 Release date??

04-18-2013 05:20 AM in reply to: mcgyvr
download.jpg
mcgyvr wrote:

camilo.lemos wrote:

Hi all, 

 

We are aware of the very slow download speeds as well as interruptions when downloading certain products. Our Subscription Center and download teams are looking into this as a top priority.

 

Best regards,


 

tell them to fix the "Install Now" dropdown box too.. When I try to expand it to select "Download" I have to use the scroll bar because anything in the dropdown is below the screen.. Then you pull the scroll bar down and the dropdown box closes.. It is impossible for me to select "download"..

see attached picture..


It works fine here :/

 

Using Chrome

Regards,

James Lovell
Windows 7 Professional (64-Bit)
Dell T5600 - Xeon E3-2687W 8(16) Core CPU
16GB ECC RAM, 2GB Quadro 4000, 256GB SSD
Autodesk Product Design Suite Ultimate 2015
*Expert Elite*
-niels-
Posts: 1,466
Registered: ‎06-20-2006
Message 27 of 44 (379 Views)

Re: Inventor 2014 Release date??

04-18-2013 05:24 AM in reply to: mcgyvr

mcgyvr wrote:

Then you pull the scroll bar down and the dropdown box closes.. It is impossible for me to select "download"..

see attached picture..


I had that problem too, i managed to get to the other options by using the arrow keys while keeping my cursor in the dropdown box...


Keeping reasonable speed and proper resuming using "DownThemAll" download manager addin in Firefox. (~500kb/s).

Other people already came asking if i was downloading anything cause the internet was so slow...



Using IV2014 Pro SP2 - upd.1, Win7-64bit
*Expert Elite*
mcgyvr
Posts: 6,646
Registered: ‎12-01-2004
Message 28 of 44 (376 Views)

Re: Inventor 2014 Release date??

04-18-2013 05:28 AM in reply to: jameslovell4987

jameslovell4987 wrote:
download.jpg
m


It works fine here :/

 

Using Chrome


Yes but I have way more programs in my list (and on subscription) than you.

We have AutoCAD Inventor Pro, Inventor Routed Systems, Algor sim, Inventor Pro, and Autodesk Product Design Suite Ultimate in my list and the dialog box is only 500px fixed height with overflow x hidden.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
mcgyvr
Posts: 6,646
Registered: ‎12-01-2004
Message 29 of 44 (371 Views)

Re: Inventor 2014 Release date??

04-18-2013 05:32 AM in reply to: mcgyvr

Crap.. And now the download manager just starts to run.. says "repairing" then closes.. Time to try another way. Lets try browser download..

 

 

Downloading now (started 8:35am..)... Its going pretty FAST.. But we have a really fast internet connection here..

oh screw it..I'll just wait.. got about 30% done then the downloads just stopped and said they were finished..

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Valued Mentor
SeanFarr
Posts: 475
Registered: ‎07-25-2012
Message 30 of 44 (352 Views)

Re: Inventor 2014 Release date??

04-18-2013 06:02 AM in reply to: mcgyvr

Seems good from here up in Northern Ontario Canada! gotta love FibreOP!

download.png

 

 

Sean Farr
Product Designer at TESInc.ca

Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube