Thanks for you help. Take a look at this thread where I'have had posted some comments.
See below my answer to your questions:
1. Exactly how were your templates defined with the problem ?
When using the create new command, select a template (between 10 different) take a long time : above 10 seconds to activate the selected files...
2. Is it any faster on the second invocation of the File, New dialog compared to the first ?
3. What sort of delays are you talking about here ? Seconds, minutes ?
above 10 seconds but could freeze the computer for minutes!!
4. Does mapping a network drive instead of using a UNC definition also fix the problem, similarly to using a local drive ?
The project files refer to network drive (H:/ or something else). But your question give me the idea to used a UNC Path (\\fileserver\...\...\template\) and... it works better !! Not as fast as for Inventor 2012 but it is really better !!!
But I can't understand why it works because it seems that network mapping is the best ..??
5. How much data is in the folder one level above the templates folder ? If you create an empty folder above templates, does that also improve performance ? Many file in many sub-folder on the above folder
Thanks guy, it seems that I'm going in the good direction... I will remap our project file with UNC path...
This is a bit strange since in our experience you should get better performance with a mapped network drive as opposed to a UNC drive. The only thing I can think of right now, is that the File New dialog, (I believe) will try to gather all the files/folders/properties of everything at the same level as the Templates folder itself. (You can likely see this in the Ui).
Do you have the exact syntax of the better performing UNC mapping compared to what your H: drive was mapped to ? When you say that there are lots of other folders/files at the same level as your templates folder, I wonder if somehow, the File New dialog is interrogating a lot more info depending on exactly how your folders/drives are structured.
Perhaps something you can investigate if/when you get chance, while we're doing further follow up here ?
The Update 1 for SP1.1 did nothing for my performance as well.
...When you say that there are lots of other folders/files at the same level as your templates folder, I wonder if somehow, the File New dialog is interrogating a lot more info depending on exactly how your folders/drives are structured...
This really seems to make sense. Attached is a screenshot of the 'New File' screen with the templates mapped to when there is a performance issue. Even though the templates are mapped to "V:/Inventor Templates" it is still showing all of the folders on the same level as that directory instead of only the children. And there is over 1TB of data in those peer folders. Obviously by mapping V:/Inventor Templates as its own network drive this folder becomes isolated.
We are seeing the exact same issue. In the file new dialog we are seeing any folders that are also contained withing the parent folder of the Templates folder. This is only happening however when we use a mapped network drive letter. If I map the path directly thru the UNC it works just fine, but is not acceptable for our use. We want to use a drive letter since we deploy our standards worldwide and do not want to have to reconfigure for every server.
Attached is a word document with screenshots showing the difference when having the templates path mapped thru a UNC or thru a drive letter.
Currently we are working on our upgrade for 100+ users and it would be great if we could get a SP2 or an update to fix this.
Greenheck Fan Co.
If switching to UNC is not an option for you, then a workaround is to add an empty folder above the "Templates" folder, move Templates down a level in to that, & then modify your project definition to point to the new Templates location.
We are currently looking at this issue further.
Start with some of our most frequented solutions to get help installing your software.