Inventor General

Active Member
Posts: 9
Registered: ‎11-06-2012
Message 1 of 8 (811 Views)

How to model an Oloid

811 Views, 7 Replies
11-07-2012 02:58 AM



I am new to inventor. Can anybody show me how to model an oloid in inventor?

I can't get it to work using the revolve tool. I found the attachment in a previous post but

the post didn't really explain how he did it. Thanks.

Posts: 1,870
Registered: ‎09-15-2003
Message 2 of 8 (790 Views)

Re: How to model an Oloid

11-07-2012 04:56 AM in reply to: Brady8

Try attaching again-- WinZip claims it's not a valid archive.


If what you've posted is a .ipt model of an oloid, then you should be able to see how the creator modeled it by examining sketches and features.


The attached file is my (version 2013-- you didn't mention what version you're working in) attempt.  I don't know if it's mathematically correct, though.

*Expert Elite*
Posts: 26,246
Registered: ‎04-20-2006
Message 3 of 8 (770 Views)

Re: How to model an Oloid

11-07-2012 06:32 AM in reply to: Brady8

I don't think anyone came up with a true solution back then

it might be interesting to give it a try again.


Please mark this response as "Accept as Solution" if it answers your question.
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
Active Member
Posts: 9
Registered: ‎11-06-2012
Message 4 of 8 (714 Views)

Re: How to model an Oloid

11-08-2012 01:43 AM in reply to: Brady8




I'm working in inventor 2013. I shall try to reattach the oloid version from the above mentioned thread.

It would be interesting to see if inventor can make a sheet metal pattern.

I've tried to use the shell function but I haven't been able to get it to work.



Active Member
Posts: 9
Registered: ‎11-06-2012
Message 5 of 8 (643 Views)

Re: How to model an Oloid

11-08-2012 11:32 PM in reply to: Brady8



Sam B your oloid was a good attempt but comparing with oloid images from the net

I've noticed the ridge doesnt seem to go the whole length of the side meaning the

edge is just 240degree arcs on each end and the rest is transistion if that makes

any sense.

Comparing to the solution from the other thread the end is also square (in profile)

 on that one which I think is probably correct.

Anyhow good effort you made it a lot further then I could. By the way a good

documentary on oloids on youtube is "the old man and the oloid'.



Valued Contributor
Posts: 95
Registered: ‎07-06-2011
Message 6 of 8 (606 Views)

Re: How to model an Oloid

11-09-2012 10:42 AM in reply to: Brady8

I took a crack at it and came close.  There is a visible flaw/artifact.  I'm not sure how to improve the loft; probably with more rails.  I modeled a quarter of the shape and mirrored the rest.  See what you can do with it.  I'm out of time.

Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
Distinguished Contributor
Posts: 109
Registered: ‎11-18-2010
Message 7 of 8 (526 Views)

Re: How to model an Oloid

11-15-2012 01:25 AM in reply to: JDMather

Hi JD,


I have had a few attempts at the Oloide and have something nearly right.


 If you play with the dimension "Adjust sketch (1mm to 74.95)" sketch found within the Loft

called "Adjust this Loft" I can get some fairly interesting results (not perfect Class A but Ok).


Any feedback would be welcome.





Inventor Professional 2013

Build 176 SP1.1

Active Member
Posts: 9
Registered: ‎11-06-2012
Message 8 of 8 (456 Views)

Re: How to model an Oloid

11-17-2012 05:46 PM in reply to: Mark.Downes




I shall attach a mathematical paper on the Development of the Oloid.

I think figure 4 may be what a flat sheet metal pattern may look like.




You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor