Inventor General

Reply
Contributor
haisin.rusli
Posts: 35
Registered: ‎12-20-2011
Message 1 of 14 (4,322 Views)
Accepted Solution

How to draw segment elbow 90 degrees and create Flat Pattern ?

4322 Views, 13 Replies
01-16-2013 08:21 PM

Hi,

I would like to know how to draw segment elbow 90 degrees ( segments are not equal ) and create Flat Pattern for each of the segments - using sheetmetal in Autodesk Inventor?

 

Best Regards,

Haisin Rusli

*Pro
sbixler
Posts: 1,868
Registered: ‎09-15-2003
Message 2 of 14 (4,287 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-17-2013 03:56 AM in reply to: haisin.rusli

Please always include the Inventor version you're working in.  If I produce a 2013 solution, will you be able to open it?

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

*Expert Elite*
JDMather
Posts: 26,161
Registered: ‎04-20-2006
Message 3 of 14 (4,278 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-17-2013 04:43 AM in reply to: haisin.rusli

Can you attach the ipt file of what you attempted.

Search here on sheet metal gore(s) might turn up the solution.

 

Trimmed surfaces and Thicken.

I would create the surface model and then Derive Component into each gore part to Thicken and Flat Pattern.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
haisin.rusli
Posts: 35
Registered: ‎12-20-2011
Message 4 of 14 (4,239 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-20-2013 06:36 PM in reply to: haisin.rusli

Hi Sam B, I am using Inventor Professional 2013 - 64 Bit.

Hi JDMather, here I attach ipt file that I attempt to draw.

 

Best Regards,

Haisin Rusli

 

 

Distinguished Contributor
TheCADWhisperer
Posts: 142
Registered: ‎04-16-2010
Message 5 of 14 (4,189 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-22-2013 07:12 AM in reply to: haisin.rusli

Check this example.

Contributor
haisin.rusli
Posts: 35
Registered: ‎12-20-2011
Message 6 of 14 (4,163 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-22-2013 10:45 PM in reply to: TheCADWhisperer

Hi TheCADWhisperer,

it works good! How did you make it?

Please explain the steps.

How to split each segment ?

 

 

Best Regards,

Haisin Rusli

*Pro
sbixler
Posts: 1,868
Registered: ‎09-15-2003
Message 7 of 14 (4,136 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-23-2013 05:10 AM in reply to: haisin.rusli

You can find this out for yourself by examining the files.  Open Gore2.ipt, for example, and notice that it is a sheet metal part with only one feature: a derive of Elbow Master.ipt.  Right click on this feature and choose Open Base Component.  This will open the file Elbow Master.ipt.  Now pull the End of Part marker from the bottom of the browser to the top (everything disappears).  Now pull it down one step at a time and examine what TheCADWhisperer did at each step.  If there's anything you don't understand, just ask here.  But you'll learn a lot more by trying to figure it out for yourself.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

Mentor
RobJV
Posts: 534
Registered: ‎07-14-2004
Message 8 of 14 (4,109 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-23-2013 02:21 PM in reply to: TheCADWhisperer

Hi,

 

That is a good way of doing it and I am sure it would be within manufacturing tolerances but a big issue in modelling this type of ducting is the interference problems between adjoining sections of the "lobster". (Simply zoom in and you will see that all the sections interfere.)  To avoid this, the op could specifiy a small angle between parts in the skeletal sketch (on the interior side) or use a program like duct pro for inventor.  It is cheap and will pay for itself in no time even if you only do ducting like this once in a while as I do.  (I am not associated with duct pro in any way.)

 

Rob

Contributor
haisin.rusli
Posts: 35
Registered: ‎12-20-2011
Message 9 of 14 (4,035 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

01-31-2013 11:44 PM in reply to: haisin.rusli

@TheCADWhisperer / Sam B,

After Sweep Surface, how to trim surfaces because I have no workplane ?

Please advice.

 

@RobJV thanks for the information.

 

Best Regards,

Haisin Rusli

*Pro
sbixler
Posts: 1,868
Registered: ‎09-15-2003
Message 10 of 14 (4,026 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

02-01-2013 05:01 AM in reply to: haisin.rusli

What do you want to trim?  You've got the surfaces you need, now thicken them individually into separate solids.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube