Inventor General

Reply
*McConnell, Cory
Message 1 of 8 (72 Views)

Hole Note tolerances

72 Views, 7 Replies
10-30-2002 10:53 PM
I posted a screenshot in CF. I placed the hole note and then added a
deviation tolerance to it of +.001 -.002.

--
Cory McConnell
BJ pipeline Inspection
*McConnell, Cory
Message 2 of 8 (71 Views)

Re: Hole Note tolerances

10-31-2002 01:24 AM in reply to: *McConnell, Cory
it is a hole note. I can't change the signs while editing the tolerance for
a hole note through the hole note dialog. IV did it on its own.

--
Cory McConnell
BJ pipeline Inspection
"Cory McConnell" wrote in message
news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> I posted a screenshot in CF. I placed the hole note and then added a
> deviation tolerance to it of +.001 -.002.
>
> --
> Cory McConnell
> BJ pipeline Inspection
>
>
*Dotson, Sean
Message 3 of 8 (71 Views)

Re:

10-31-2002 01:34 AM in reply to: *McConnell, Cory
Cory,

I just tried the same thing but no dice... mine came out OK.

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> it is a hole note. I can't change the signs while editing the tolerance
for
> a hole note through the hole note dialog. IV did it on its own.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Cory McConnell" wrote in message
> news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > I posted a screenshot in CF. I placed the hole note and then added a
> > deviation tolerance to it of +.001 -.002.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> >
> >
>
>
*McConnell, Cory
Message 4 of 8 (71 Views)

Re:

10-31-2002 02:13 AM in reply to: *McConnell, Cory
Oh good.Now I have to find out why mine is doing it.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> Cory,
>
> I just tried the same thing but no dice... mine came out OK.
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > it is a hole note. I can't change the signs while editing the tolerance
> for
> > a hole note through the hole note dialog. IV did it on its own.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Cory McConnell" wrote in message
> > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > I posted a screenshot in CF. I placed the hole note and then added a
> > > deviation tolerance to it of +.001 -.002.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > >
> > >
> >
> >
>
>
*McConnell, Cory
Message 5 of 8 (71 Views)

Re:

10-31-2002 02:17 AM in reply to: *McConnell, Cory
We have to enter the signage? That is different.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> Cory,
>
> I just tried the same thing but no dice... mine came out OK.
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > it is a hole note. I can't change the signs while editing the tolerance
> for
> > a hole note through the hole note dialog. IV did it on its own.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Cory McConnell" wrote in message
> > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > I posted a screenshot in CF. I placed the hole note and then added a
> > > deviation tolerance to it of +.001 -.002.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Message 6 of 8 (71 Views)

Re:

10-31-2002 02:22 AM in reply to: *McConnell, Cory
What do mean enter the signage. The +/- buttons? Those have always been
there...

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> We have to enter the signage? That is different.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Sean Dotson" wrote in message
> news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > Cory,
> >
> > I just tried the same thing but no dice... mine came out OK.
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Cory McConnell" wrote in message
> > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > it is a hole note. I can't change the signs while editing the
tolerance
> > for
> > > a hole note through the hole note dialog. IV did it on its own.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > > "Cory McConnell" wrote in message
> > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > I posted a screenshot in CF. I placed the hole note and then added
a
> > > > deviation tolerance to it of +.001 -.002.
> > > >
> > > > --
> > > > Cory McConnell
> > > > BJ pipeline Inspection
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*McConnell, Cory
Message 7 of 8 (71 Views)

Re:

10-31-2002 02:24 AM in reply to: *McConnell, Cory
I don't have signs - I have to type them in. I posted my dialogue box in CF.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:FD6482147E94E4051056B8BE56FC3B29@in.WebX.maYIadrTaRb...
> What do mean enter the signage. The +/- buttons? Those have always been
> there...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> > We have to enter the signage? That is different.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Sean Dotson" wrote in message
> > news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > > Cory,
> > >
> > > I just tried the same thing but no dice... mine came out OK.
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > remove all #s from email
> > > -----------------------------------------
> > > "Cory McConnell" wrote in message
> > > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > > it is a hole note. I can't change the signs while editing the
> tolerance
> > > for
> > > > a hole note through the hole note dialog. IV did it on its own.
> > > >
> > > > --
> > > > Cory McConnell
> > > > BJ pipeline Inspection
> > > > "Cory McConnell" wrote in message
> > > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > > I posted a screenshot in CF. I placed the hole note and then
added
> a
> > > > > deviation tolerance to it of +.001 -.002.
> > > > >
> > > > > --
> > > > > Cory McConnell
> > > > > BJ pipeline Inspection
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Message 8 of 8 (71 Views)

Re:

10-31-2002 02:29 AM in reply to: *McConnell, Cory
Ok, was talking about the tolerance dialogue in the parameters window. In
which case you'd check "use model tolerances". I see what you mean now.
I'd think they should have buttons in this dialogue too for consistency's
sake..


--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:6311C03821AAECB8DCB642E0EE764DB1@in.WebX.maYIadrTaRb...
> I don't have signs - I have to type them in. I posted my dialogue box in
CF.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Sean Dotson" wrote in message
> news:FD6482147E94E4051056B8BE56FC3B29@in.WebX.maYIadrTaRb...
> > What do mean enter the signage. The +/- buttons? Those have always
been
> > there...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Cory McConnell" wrote in message
> > news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> > > We have to enter the signage? That is different.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > > "Sean Dotson" wrote in message
> > > news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > > > Cory,
> > > >
> > > > I just tried the same thing but no dice... mine came out OK.
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > remove all #s from email
> > > > -----------------------------------------
> > > > "Cory McConnell" wrote in message
> > > > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > > > it is a hole note. I can't change the signs while editing the
> > tolerance
> > > > for
> > > > > a hole note through the hole note dialog. IV did it on its own.
> > > > >
> > > > > --
> > > > > Cory McConnell
> > > > > BJ pipeline Inspection
> > > > > "Cory McConnell" wrote in message
> > > > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > > > I posted a screenshot in CF. I placed the hole note and then
> added
> > a
> > > > > > deviation tolerance to it of +.001 -.002.
> > > > > >
> > > > > > --
> > > > > > Cory McConnell
> > > > > > BJ pipeline Inspection
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube