Inventor General

Reply
Valued Contributor
nickv02
Posts: 68
Registered: ‎03-23-2012
Message 1 of 4 (324 Views)
Accepted Solution

Help making sheet metal part

324 Views, 3 Replies
10-12-2012 12:57 PM

I have a 14 gage sheet metal part that follows the profile in the attached picture.  7/8" legs with a 1/16" offset.  Because it's 14 gage, the contour flange won't create it.  I need it to be able to be turned in to a flat pattern so that I may export it to a .dxf.  Is there another way to make this that will allow me to flat pattern it?  I have a couple of pieces like this where the offset is very slim, so I am looking for a way to do all of them like this.

 

*Expert Elite*
mcgyvr
Posts: 6,708
Registered: ‎12-01-2004
Message 2 of 4 (304 Views)

Re: Help making sheet metal part

10-12-2012 01:22 PM in reply to: nickv02

That profile is just incorrect. Its not made like that in real life unless its a stamping operation which Inventor cannot properly define the flat pattern for.

 

How is this part fabricated?

 

Model the 2 faces then use "bend" to connect them if press braked.

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
Curtis_Waguespack
Posts: 2,801
Registered: ‎03-08-2006
Message 3 of 4 (303 Views)

Re: Help making sheet metal part

10-12-2012 01:22 PM in reply to: nickv02

Hi nickv02,

 

Attached is an example that might give you a hint. I didn't see any information on what version of Inventor you're using, but hopefully you can open an Inventor 2010 file (that's the oldest version I have Installed these days.)

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Valued Contributor
nickv02
Posts: 68
Registered: ‎03-23-2012
Message 4 of 4 (288 Views)

Re: Help making sheet metal part

10-12-2012 01:34 PM in reply to: Curtis_Waguespack

Inventor 2013, forgot that.

 

It's a stamping procedure.  You're right, I was going about it the wrong way and drew it incorrectly.

 

Curtis, that example is excellent, thank you for your help!

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube