Inventor General

Reply
Contributor
kbdmann
Posts: 11
Registered: ‎05-10-2007
Message 1 of 8 (478 Views)

Help! Importing MDT files into Inventor 2012 Pro

478 Views, 7 Replies
09-19-2011 09:42 AM

I have downloaded and installed the MDT 2009 for Inv 2012.

When I try and import, Inv 2012 is opening AutoCAD 2012 insted of MDT 2009

So I get An error about needing MDT newer than (6)

How do I get the IMPORT option with 2012

to use the MDT 2009 EXE file.

I have changed (FILE OPENS WITH) still had no progres...

 

KArl

Distinguished Mentor
rdyson
Posts: 876
Registered: ‎04-11-2005
Message 2 of 8 (477 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-19-2011 09:47 AM in reply to: kbdmann

Try launching MDT (be sure it is MDT) with no files open. While it's open, try your import into IV. Check the options before okaying the import.

Contributor
kbdmann
Posts: 11
Registered: ‎05-10-2007
Message 3 of 8 (470 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-19-2011 10:55 AM in reply to: rdyson

I hace.

I open and have MDT-2009 running in the background.

When I IMPORT Inv-2012 opens AutoCAD-2012 and not MDT-2009

I then get a msg "MDT ver above 6 required" and the file is not imported.

 

I am on Windows 7 Pro

 

I have another question? I have imported some step files (Parts) to Inv.

I do not like how they are oriented how do I change the part to sit in the x,y,z the way I want?

Distinguished Contributor
kstate92
Posts: 895
Registered: ‎05-09-2005
Message 4 of 8 (466 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-19-2011 11:05 AM in reply to: kbdmann

This won't be much help if you have a ton of files to convert, but what happens if you open the file in MDT 2009, update everything, save as an MDT 2009 file, then import that file into Inventor?

KState92
Inventor Professional 2014 64 SP2
Windows 7 Pro 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 4000
Distinguished Mentor
rdyson
Posts: 876
Registered: ‎04-11-2005
Message 5 of 8 (465 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-19-2011 11:10 AM in reply to: kbdmann

Sorry, works for me so no help.

On your second question, are you concerned that the parts won't lay right in the parts crib?

Employee
jeffrey.sun
Posts: 33
Registered: ‎08-07-2011
Message 6 of 8 (432 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-19-2011 11:43 PM in reply to: kbdmann

Hello kbdmann,

 

Have a try the following steps.

1. Open MDT2009.

2. Open the MDT file in MDT. Verify it can be opened correctly.

3. Close MDT.

4. Open Inventor 2012.

5. Invoke the command "Inventor Icon | Open | Import DWG".

6. Select the MDT file in the file open dialog. Click Open button.

7. Inventor will detect the file type automatically. Verify the radio button "Mechanical Desktop File" is selected in the "DWG/DXF File Wizard" dialog.

8. Click the finish button.

Expected Result: The MDT 2009 will be started during the translation and file can be imported correctly.

 

If the steps above don't work, then

9. Close Inventor.

10. Run "c:\Program Files\Autodesk\Inventor 2012\Bin\inventor.exe /Install"

11. Repeat the steps 4 to 8

 

Hope it helps.

 


Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------



Jeffrey Sun
SW Engineer
Manufacturing Industry Group
Autodesk, Inc.

*Pro
ampster
Posts: 1,113
Registered: ‎07-26-2005
Message 7 of 8 (420 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

09-20-2011 05:51 AM in reply to: jeffrey.sun

After Step 2 above, it might also help to Save the file while you have it open in MDT, as kstate92 mentioned above.

New Member
j.lee.allen
Posts: 2
Registered: ‎01-24-2012
Message 8 of 8 (291 Views)

Re: Help! Importing MDT files into Inventor 2012 Pro

03-19-2012 11:27 AM in reply to: kbdmann

I was having the same problems kbdmann was having. I had followed all of the steps in the readme file that was with the MDT 2009 for Inventor 2012. After following the steps from Jeffrey Sun, especially step 10, it now works. Please note that step 10 is different than that in the readme file with MDT 2009 on the Autodesk website. It seems to be a key step in making this version of MDT 2009 work with Inventor 2012. Hope this helps others who are having this problem.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube