Inventor General

Reply
Contributor
jwillieinventor
Posts: 16
Registered: ‎05-29-2012
Message 1 of 8 (422 Views)

FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

422 Views, 7 Replies
06-18-2012 02:25 AM

Hello All,

 

I am learning how to use Inventor for doing FEM simulations. I just wanted to know if there is a way i can determine the number of elements in the FE model after the mesh generation process?

 

Thanks in advance for the help.

 

sincerely,

James

 

*Expert Elite*
Inv_kaos
Posts: 728
Registered: ‎07-26-2007
Message 2 of 8 (417 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 03:29 AM in reply to: jwillieinventor
Top left of the modelling screen when in mesh view.
Please mark as "Accept as Solution" if it answers your question or "Kudos" if you found it useful.
---------------------------------------------------------------------------------------------------------------------
Stew, AICP
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
Contributor
jwillieinventor
Posts: 16
Registered: ‎05-29-2012
Message 3 of 8 (414 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 03:33 AM in reply to: Inv_kaos

Thanks for the ans. I had already seen it. I am just wondering whether you can also vary the element type in inventor? We seem to have tri elements. Can one change it to QUAD?

 

Thanks!

 

Jimmy

*Expert Elite*
Inv_kaos
Posts: 728
Registered: ‎07-26-2007
Message 4 of 8 (412 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 03:36 AM in reply to: Inv_kaos
In case you are interested, the number of nodes is probably of more use. Since the degrees of freedom is equal to the number of nodes x 3 for solids or x 6 for shells minus the number of degrees of freedom you fix with boundary conditions per node. The degrees of freedom are equal to the number of equations that must be solved for a direct solver and will give you a good guide as to how long your simulation will take.
Please mark as "Accept as Solution" if it answers your question or "Kudos" if you found it useful.
---------------------------------------------------------------------------------------------------------------------
Stew, AICP
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
*Expert Elite*
Inv_kaos
Posts: 728
Registered: ‎07-26-2007
Message 5 of 8 (409 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 03:38 AM in reply to: jwillieinventor
No, only tetrahedral elements in Inventor. You might want to look into Autodesk Simulation (Algor) if you need more element types.
Please mark as "Accept as Solution" if it answers your question or "Kudos" if you found it useful.
---------------------------------------------------------------------------------------------------------------------
Stew, AICP
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
Contributor
jwillieinventor
Posts: 16
Registered: ‎05-29-2012
Message 6 of 8 (395 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 08:00 AM in reply to: jwillieinventor

Hi,

 

I have another problem or question. I wanted a benchmark that i could use to test the accuracy of the FEM solvers in Inventor and ANSYS STRUCTURAL. I am interested getting data on the Fichera Problem. Any ida how i can get this?

 

Thanks!

 

Jimmy

*Expert Elite*
blair
Posts: 3,934
Registered: ‎11-13-2006
Message 7 of 8 (389 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 08:43 AM in reply to: jwillieinventor

Not sure on Inventor's FEA, but with the Mechanical Simuation (formerly Algor) there are verification models on the Autodesk website. You will need to go to the Product Support section for Mechanical Simulation. You should be able to navigate to it from the Support icon at the top of this user forum.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
*Expert Elite*
Inv_kaos
Posts: 728
Registered: ‎07-26-2007
Message 8 of 8 (366 Views)

Re: FEM using INVENTOR-Want to determine the number of Elements in the FE mesh

06-18-2012 04:13 PM in reply to: jwillieinventor
Check out the following link. It compares Inventor Simulation and Autodesk Simulation 2012 to NAFEMS benchmarks. http://images.autodesk.com/adsk/files/autodesk_simulation_tools_NAFEMS_white_paper_en.pdf
Please mark as "Accept as Solution" if it answers your question or "Kudos" if you found it useful.
---------------------------------------------------------------------------------------------------------------------
Stew, AICP
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube