Inventor General

Reply
Active Member
amalito
Posts: 10
Registered: ‎05-23-2011
Message 1 of 8 (14,465 Views)
Accepted Solution

Error in reading RSe stream

14465 Views, 7 Replies
05-26-2011 08:09 AM

Hello,

 

I am currently experiencing this error when basically putting an Inventor 2012 file (part or assembly) on a flash drive and then loading the file(s) onto a different computer with Inventor 2011 installed. Once in Inventor 2011 and trying to open the necessary file(s) I receive this error. Is there some difference between the 2011 and 2012 files that is causing this to happen? Or the face that I am using the student version of both?

 

I attached the file I am trying to open.

 

Thanks

HVM Racing
CFD Engineer
tonymalito@gmail.com
*Expert Elite*
blair
Posts: 3,943
Registered: ‎11-13-2006
Message 2 of 8 (14,461 Views)

Re: Error in reading RSe stream

05-26-2011 08:26 AM in reply to: amalito

Native Inventor files are not backward compatible. The only way to open IV2012 files in a IV2011 system is to export the IV2012 files to a neutral format and import them into IV2011. This will lose all model feature tree history.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
Active Member
tnafbrat
Posts: 9
Registered: ‎01-14-2009
Message 3 of 8 (13,464 Views)

Re: Error in reading RSe stream

10-12-2011 07:22 AM in reply to: amalito

I am getting this same error message under similar circumstances.  I copied the file to a flash drive and onto another computer, however, the original file is 2011 and the program trying to load is 2012.  Along with this, at the same time, I'm getting the message "Error Loading segment AMAPPSegment in database..."  help?

*Expert Elite*
blair
Posts: 3,943
Registered: ‎11-13-2006
Message 4 of 8 (13,454 Views)

Re: Error in reading RSe stream

10-12-2011 08:40 AM in reply to: amalito

Check the directory that you have copied it to. You might not have permissions, or the directory may be a Library. When in doubt. Power down the system and do a restart.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
Active Member
tnafbrat
Posts: 9
Registered: ‎01-14-2009
Message 5 of 8 (13,093 Views)

Re: Error in reading RSe stream

11-09-2011 07:30 AM in reply to: blair

I have all the appropriate accesses and in the same directory are some files that will open, some that will not, all part files and they are not library files, none of the obvious.  And, it is occurring at multiple workstations with the same files only now it just says it cant open the file and crashes Inventor.  Part files, not assemblies, simple uncomplicated small files.

Active Contributor
jameslenane
Posts: 27
Registered: ‎08-17-2011
Message 6 of 8 (10,763 Views)

Re: Error in reading RSe stream

05-11-2012 12:38 PM in reply to: amalito

Ive been getting a similar issue with error in reading RSe stream,and thats just opening files,not of a flash drive,now I was running 2011 and still am,and my tutorial files vanished out of my projects box so cant open 6 months of work,this all seems to have happened since I downloaded inv 2012,strange!!! Now opening 2011 files in 2012 ,convert to step files and 2012 will open but without history tree which is a pain depending on what your doing but theirs a solution,go to autodesk labs and download feature recognition enabler and this will let you rebuild the history tree in 2012,I know some of this is of topic but some of it might help with opening older release files and reconstructing your history tree,I found this out the hard way,2012 is great but so is 2011,there is not that much difference,I do like the way it renders your part when change the visual style to realistic,thats cool but if you didnt have it ,it wouldnt be the end of the world as you can produce great renders in 2011 and its more hands on so you learn more!

Active Member
vance
Posts: 9
Registered: ‎01-08-2010
Message 7 of 8 (2,759 Views)

Re: Error in reading RSe stream

04-08-2014 01:49 PM in reply to: jameslenane

I have been getting the same error with an assembly file that I had recently created & had opened earlier today with no issues.  When I tried to open the same file about 30 minutes later, I received 2 error messages:

 

"Error in reading RSe segment streamer in [Assembly file name]

Error loading segment AmAppSegment in database [Assembly file name]"

 

After hunting around on the forum, I found a possible solution that involves copying & renaming the same file from the "OldVersions" folder.  I tried that, and when opening the new renamed file I received multiple "RSe segment" errors, and then Inventor unceremoniously crashed.

 

I'm currently using Inventor 2014, and prior to the errors I did not move the affected file from its original folder, nor am I trying to open the file on an earlier version of Inventor.  I'm able to open the individual part files that make up the assembly, and can open other .iam files from the same project with no issues.  All that being said, I'm not sure what else to do.  Hopefully someone out there has an idea or two?  Thanks!

Contributor
BrandonBG
Posts: 18
Registered: ‎02-12-2013
Message 8 of 8 (783 Views)

Re: Error in reading RSe stream

06-26-2014 07:14 AM in reply to: amalito

I think the RSe stream error results from a conflict with .IPJ files. I don't have any version issues because all the active projects are using Inventor 2014. That being said, 2015 is installed (but not being used).

 

If you activate a project, then open a DWG, IAM, or IPT from outside the workspace of the active project, and save it, the corruption happens. Sometimes. I haven't been able to recreate this consistently.

 

If this is the problem, any ideas how to restore the link between the IPJ and the files?

 

Brandon

Inventor 2014

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube