Inventor General

Reply
Member
Posts: 3
Registered: ‎09-28-2012
Message 1 of 5 (1,012 Views)
Accepted Solution

Drawing Bevel Gears

1012 Views, 4 Replies
09-28-2012 07:06 PM

Hey Guys,

 

I am trying to draw a bevel gears from drawings, one is a scroll plate and the others are gears with a key hole. As you can see in the following attachment.

 

My question is how do you draw bevel gears on the face of the scroll plate and the cylindrical face of the other 3 gears?

 

Cheers

*Expert Elite*
Posts: 25,337
Registered: ‎04-20-2006
Message 2 of 5 (996 Views)

Re: Drawing Bevel Gears

09-29-2012 04:05 AM in reply to: mini88

I would start with the Gear Generator Design Accelerator in Inventor assembly environment.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Posts: 3
Registered: ‎09-28-2012
Message 3 of 5 (969 Views)

Re: Drawing Bevel Gears

09-29-2012 07:14 PM in reply to: JDMather

Hey, thanks for the quick reply.

 

I've tried playing around with the Gear Generator Design Acceerator, but it always outputs new gears rather than making the face of the components into the gears. (See image).

 

Can you possibly guide me through how to use the Gear Generator Design Accelerator to get it to work?

 

Chuck.jpg

*Expert Elite*
Posts: 25,337
Registered: ‎04-20-2006
Message 4 of 5 (943 Views)

Re: Drawing Bevel Gears

09-30-2012 10:44 AM in reply to: mini88

mini88 wrote:

 but it always outputs new gears


 

 

Then simply make the new gears.

Right click and Open.

Finish the desired geometry.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Posts: 3
Registered: ‎09-28-2012
Message 5 of 5 (892 Views)

Re: Drawing Bevel Gears

10-01-2012 09:24 PM in reply to: JDMather

Managed to get it working, thanks JDMaather

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube