Inventor General

Reply
Member
Gregory454
Posts: 3
Registered: ‎02-03-2011
Message 1 of 6 (1,151 Views)
Accepted Solution

Display randomly freezes and won't refresh

1151 Views, 5 Replies
02-08-2011 07:22 AM

I'm not sure if anyone else has had this problem.  I'm not even sure how to search for a solution as what I'm experiencing is really strange and hard to describe in search criteria.

 

Anyway, I just updated to the Factory Design Suite Advanced package for 2011 which, of course, includes Inventor.  I have downloaded and installed all updates, service packs and hotfixes I could find btw.  What happens is I'll be working in Inventor on a solid model of ANY size (even a single part) and with absolutely no warning, the display window will freeze up and won't refresh.  What's really weird though is that Inventor itself is not locked up.  I can click on any of the buttons or any of the items shown in the browser as though the program's running normally.  I can check the task manager and it shows Inventor to be running normally.  The memory status bar in Inventor shows lots of available memory.  I can even hover over the display window in the area where the view steering wheel is located and the icon will change appearance as though it's working normally.  I can even save the file.  If I close the file, it responds like normal and goes back to the default screen.  If I try to open ANY file after that, however, the screen will not refresh or show me the file I opened, even though everything else works fine and the program isn't frozen.  The only way to restore full function is to completely close and reopen Inventor (on average I have to do this about once an hour).  Btw, I'm also working in a local directory stored on my hard drive, not a network.

 

My first inkling is that it's a graphics issue but I have played with all the display settings to no avail.  I ran a diagnostic on the video card and Inventor says that I'm running an Autodesk Certified driver.  All the specs are within reason I think...Can anyone help me?

 

My workstation specs:

Dell Precision M4500 laptop

Intel core i7 processor, 2.67 GHz

4 GB RAM

Windows XP Professional SP3, 32-bit, running in 3 GB mode

NVIDIA Quadro FX 1800M, 1 GB graphics card (just updated the driver too...no change)

230 GB hard drive, 136 GB free space

*Expert Elite*
mcgyvr
Posts: 6,646
Registered: ‎12-01-2004
Message 2 of 6 (1,144 Views)

Re: Display randomly freezes and won't refresh

02-08-2011 07:50 AM in reply to: Gregory454

First thing..  In Inventor go to tools..application options..hardware tab and set it to "software graphics"

This "should" help eliminate your graphics card as a possible problem as it "should" not use the graphics card at all. Inventor will seem a little more sluggish but if it doesn't happen again then you know it is related to your graphics card.

 

I might even start with performance or compatibility on that hardware tab first to see if that helps.

 

Then maybe mess with tools..application options..display tab.. Change the minimum frame rate. I have mine at 2 if that helps.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
-niels-
Posts: 1,466
Registered: ‎06-20-2006
Message 3 of 6 (1,118 Views)

Re: Display randomly freezes and won't refresh

02-08-2011 11:14 PM in reply to: mcgyvr

And after trying the things mcgyvr suggested, i'd try turning of the 3GB switch to see if that changes anything.

That switch is prone to make windows pretty unstable.

If you have it set to the full 3GB, try setting it to lower values to see if it works better.


Using IV2014 Pro SP2 - upd.1, Win7-64bit
Member
Gregory454
Posts: 3
Registered: ‎02-03-2011
Message 4 of 6 (1,092 Views)

Re: Display randomly freezes and won't refresh

02-10-2011 10:14 AM in reply to: mcgyvr

mcgyvr:

 

Well I switched the hardware to compatibility mode and turned the frame rate down to 2 and still had the problem happen, though it happened less often.  I also went ahead and disabled the nVIEW desktop manager that comes with my NVIDIA driver.  I remembered that it didn't play nicely with the previous version of Inventor that I had on here.  So far, so good...We'll see if it comes back again but I think I'm in better shape now than when I started.

Member
Gregory454
Posts: 3
Registered: ‎02-03-2011
Message 5 of 6 (1,091 Views)

Re: Display randomly freezes and won't refresh

02-10-2011 10:17 AM in reply to: -niels-

neils:

 

Thanks!  Personally, I'm hoping it won't come down to this but if the fixes I've tried so far don't help, I may have to try it.  As it is, I'm always maxing out the default 2 GB allocation that Windows allows so I made the switch to help me work with larger assemblies.

Active Member
moeman69
Posts: 7
Registered: ‎06-08-2012
Message 6 of 6 (562 Views)

Re: Display randomly freezes and won't refresh

06-08-2012 05:24 AM in reply to: Gregory454

I've just had the same problem with my inventor also for the second time but I was running in sofware graphics mode when it happened so good luck with that solution helping you.

I was experencing black screens and windows 7 would tell me my driver failed error and inventor would not work properly after that so that's when I turned on the software graphics. While that problem has not replicated itself again I now have this new one. I'm running a AMD FirePro V4900 on my station when this happened.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube