Inventor General

Reply
Active Contributor
Posts: 37
Registered: ‎06-01-2012
Message 1 of 12 (2,130 Views)

Display problem Nvidia quadro 4000m

2130 Views, 11 Replies
06-05-2012 08:54 AM

When I am panning, the image in the display window flickers. It's worst when using the 3D mouse. When 3D rotating, it's not that bad.

 

I have a top of the line Dell M6600 with a quadro 4000m display card, hardware limitation shouldn't be a problem. I tried different drivers.

 

We have Z400 with quadro fx580 that don't have this problem.

 

Anyone with same setup experiencing or not this problem ? Which driver version ?

 

Vinc

*Expert Elite*
mcgyvr
Posts: 6,413
Registered: ‎12-01-2004
Message 2 of 12 (2,122 Views)

Re: Display problem Nvidia quadro 4000m

06-05-2012 09:49 AM in reply to: vmcarbonneau

what are your settings in

tools..application options..hardware tab?

and how about tools..application options..display tab (display section settings..refresh/display quality)

Have you loaded the latest driver for that card from nvidias site NOT dells site?

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
blair
Posts: 3,641
Registered: ‎11-13-2006
Message 3 of 12 (2,118 Views)

Re: Display problem Nvidia quadro 4000m

06-05-2012 09:55 AM in reply to: vmcarbonneau

The Dell site will have older version of drivers (they don't keep up on current Nvidia drivers). You will need to go to someone like the http://laptopvideo2go.com/ for their Mod'd drives.

 

Part of the install will require you to copy a DLL file to the directory of the extracted current version of Nvidia drivers. This will allow you to install non-Dell graphics card drivers.

 

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
Active Contributor
Posts: 37
Registered: ‎06-01-2012
Message 4 of 12 (2,111 Views)

Re: Display problem Nvidia quadro 4000m

06-05-2012 10:37 AM in reply to: blair

Latest drivers from Nvidia,

 

Settings:

Hardware : Quality (No amelioration when set to Performance)

Display : I changed every settings with no success

 

Mentor
trumpy81
Posts: 317
Registered: ‎10-22-2006
Message 5 of 12 (2,097 Views)

Re: Display problem Nvidia quadro 4000m

06-05-2012 04:30 PM in reply to: vmcarbonneau

I might be off the beaten track here, but how old are the computers/graphics cards?

 

When was the last time the fans were cleaned inside the computers, especially the graphics card fans?

 

Sometimes a slightly overheating card will display odd behaviour, it's just a thought, but worth checking out at least.

Regards
Andy M
-------------------------------------------------------------------------------------------
Autodesk Inventor 2013 Pro SP1.1, Win7 Pro - 64Bit - SP1, Intel i7 960 @ 3.333 GHz
Asus X58 Sabertooth, Corsair 12Gig DDR3, AMD Radeon HD6970, Samsung 830 Series 256G SSD, 2x 3TB Seagate, 2x 2TB Hitachi,
1x 1TB Samsung, 4 x 2TB Seagate in Netgear ReadyNAS NV+, Dual Asus VE278Q Monitors
Distinguished Contributor
bstewart
Posts: 114
Registered: ‎09-24-2008
Message 6 of 12 (2,075 Views)

Re: Display problem Nvidia quadro 4000m

06-06-2012 08:03 AM in reply to: vmcarbonneau

Hi Vinc,

 

Could be the driver for your 3D device needs updating.  I have virtually the same setup as you, and I don't have this problem.

 

I would also suggest getting the nVidia driver directly from their website.

 

FWIW, here's my driver versions:

nVidia Graphics Driver 296.35

3Dconnexion Driver 3.15.3

 

HTH

Bob

____________________________________________________
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
Valued Contributor
amdomag
Posts: 89
Registered: ‎06-21-2007
Message 7 of 12 (2,033 Views)

Re: Display problem Nvidia quadro 4000m

06-10-2012 08:20 AM in reply to: bstewart

Hi guys!

 

I wonder how many times is the Quadro 4000 faster than GeForce GTX 460 in civil 3D.

 

Thank you.

 

Regards.

*Pro
sbixler
Posts: 1,847
Registered: ‎09-15-2003
Message 8 of 12 (2,020 Views)

Re: Display problem Nvidia quadro 4000m

06-11-2012 04:40 AM in reply to: amdomag

I wonder what the odds are that anyone in the Inventor forum could answer your question.

Valued Contributor
amdomag
Posts: 89
Registered: ‎06-21-2007
Message 9 of 12 (2,001 Views)

Re: Display problem Nvidia quadro 4000m

06-11-2012 06:54 PM in reply to: vmcarbonneau

WTH! Sorry!

 

I was actually in a C3D forum and suddenly I found myself in the Inventor..

 

Thanks for informing me.

Active Contributor
Posts: 35
Registered: ‎10-16-2012
Message 10 of 12 (1,556 Views)

Re: Display problem Nvidia quadro 4000m

10-24-2012 12:28 PM in reply to: vmcarbonneau

Hi Vinc,

 

Did you get this resolved?

 

I have this exact setup and have not experienced this issue.  I am using the latest Nvidia drivers not the Dell drivers.  I also have my graphics display set to Quality in Inventor Pro.  I do have a problem with my screen "zoom jumping" in and out more than occasionally though.

 

Does it do this on every file - large and small?

Do you have all of your Windows Updates installed?

Any other Graphics Card issues or is this the only one?

 

JB

Product Design Suite Ultimate 2013
DELL M6600 Laptop
Intel Quad Core i7-2920 Extreme 2.5GHz
250 GB SSD / 500 GB HDD
16 GB 1600 MHz RAM
NVIDIA Quadro 4000M
Windows 7 Ultimate - 64 Bit

Designing Ninja's One At A Time

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube