Inventor General

New Member
Posts: 1
Registered: ‎12-21-2012
Message 1 of 2 (149 Views)

Design Accelerator - Missing Bolts

149 Views, 1 Replies
12-21-2012 11:08 AM

When I make a bolted connection using the design accelerator, I am usually trying to make multiple connection at once. The holes always are placed in the right place but most of the time all the bolts are missing except for the one placed at the first hole I select. Does anyone have any solutions on getting the remaining bolts to be placed correctly?

*Expert Elite*
Posts: 3,640
Registered: ‎11-13-2006
Message 2 of 2 (118 Views)

Re: Design Accelerator - Missing Bolts

12-24-2012 04:40 PM in reply to: ben_hamm

IV version and SP's would help, if you are using the pattern option, your first hole selection must be the first hole in your pattern.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 PDSU / Sim Mech 2015 /
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor