Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Custom title block placement

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
brankin
1168 Views, 3 Replies

Custom title block placement

Creating a custom title block in innventor seems to be straight foward however when I save the new title block it offsets from the sheet, up and to the right. How do I get the title block to line up with the sheet

Bill

3 REPLIES 3
Message 2 of 4
Curtis_Waguespack
in reply to: brankin

Hi brankin,

 

Depending on your situation, you can likely fix this by going to the Tools tab > Application Options button > Drawing tab. You'll see the option to control the title block insert point there.

 

Or you might just need to specify your insert point in the sketch:

 

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

Message 3 of 4
mrattray
in reply to: brankin

Do you have a seperate border? I find that having an appropriate border helps with titleblock placement for some odd reason.

Mike (not Matt) Rattray

Message 4 of 4
brankin
in reply to: Curtis_Waguespack

Thanks Curtis.....that was the problem

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report