Inventor General

Reply
*Bender, Keith
Message 1 of 3 (65 Views)

Coordinate system - sketch - cannot move

65 Views, 2 Replies
11-18-2002 10:43 AM
Hi all,

I've been struggling with this problem for some time now, so thought I'd ask
if anyone knows the solution. Sometimes, I move the sketch coordinate
system with no problem at all. Other times, I can NOT make it move no way.
For example, I just began a new assembly, creating parts in place, and on
the first grounded part, I moved the sketch coordinate system on several
sketches without problems. I moved it so I could predictably insert AutoCAD
.DWG into the sketch, and it worked beautifully. I've done this many times
before, so I know it can work. I then created several more parts, with
geometry projected from the first part. I then began a fourth part,
projected some geometry, and tried to move the sketch coordinate system.
Now, what I just did awhile ago WILL NOT WORK. I've tried everything -
closed Inventor, re-booted, started a simple .IPT , etc... I can select the
coordinate system Origin, and the next prompt ask me to "Select a Vertex,
Circular Edge, Workpoint, or Sketchpoint", but NOTHING seems to be
selectable.

Please, has anyone else seen this? What am I missing?

Keith
*Keller, Kent
Message 2 of 3 (65 Views)

Re: Coordinate system - sketch - cannot move

11-18-2002 11:27 AM in reply to: *Bender, Keith
Keith

I am pretty sure there must be a feature for it to work...... for instance I
don't think you can change it in the first sketch.

Anyhow if you have a simple ipt go ahead and post it to customer files.

--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program

http://www.MyMcad.com/KWiK/Mcad.htm

"Keith Bender" wrote in message
news:045233FF1154F1B9C118C90D34363B87@in.WebX.maYIadrTaRb...

WILL NOT WORK. I've tried everything -
> closed Inventor, re-booted, started a simple .IPT , etc...
*Germer, Ole
Message 3 of 3 (65 Views)

Re:

11-18-2002 08:07 PM in reply to: *Bender, Keith
Have you though about moving the autocad sketch after inserting it. That is
the easiest way to deal with it. That is what I do. I never bother moving
the coordinate system. Too aggravating.

--
Ole Germer
Helping create better involute profiles for gears
http://www.geocities.com/olegermer/index.html


"Kent Keller" wrote in message
news:C765A8002C69139131F53FB9F64785B5@in.WebX.maYIadrTaRb...
> Keith
>
> I am pretty sure there must be a feature for it to work...... for instance
I
> don't think you can change it in the first sketch.
>
> Anyhow if you have a simple ipt go ahead and post it to customer files.
>
> --
> Kent Keller
> Member of the Autodesk Discussion Forum Moderator Program
>
> http://www.MyMcad.com/KWiK/Mcad.htm
>
> "Keith Bender" wrote in message
> news:045233FF1154F1B9C118C90D34363B87@in.WebX.maYIadrTaRb...
>
> WILL NOT WORK. I've tried everything -
> > closed Inventor, re-booted, started a simple .IPT , etc...
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube