Inventor General

Reply
*JGH
Message 1 of 9 (84 Views)

Content Library Nuts ?

84 Views, 8 Replies
11-04-2002 08:33 PM
In the new content library...select a DIN nut regular thread of some sort,
and select nominal dia. = 8 or 10, do you get a very narrow hole ??
I.e. DIN EN 1661 (Regular thread) - I think this applies to all 8/10mm
nuts....

Jørgen
*Bilton, John
Message 2 of 9 (84 Views)

Re: Content Library Nuts ?

11-04-2002 09:04 PM in reply to: *JGH
I like the other undocumented feature that's included. Try inserting a socket head screw from
either ISO, BS or DIN libraries. Hmmm, lovely, we must all use ANSI standards (even us Europeans).


John Bilton
--
"It seemed like a good idea at the time..."
*Dotson, Sean
Message 3 of 9 (84 Views)

Re:

11-04-2002 09:14 PM in reply to: *JGH
I hear a voice whispering..."iparts"

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"John Bilton" wrote in message
news:88A78787ACD8512398675814CECC7159@in.WebX.maYIadrTaRb...
> I like the other undocumented feature that's included. Try inserting a
socket head screw from
> either ISO, BS or DIN libraries. Hmmm, lovely, we must all use ANSI
standards (even us Europeans).
>
>
> John Bilton
> --
> "It seemed like a good idea at the time..."
>
>
*McConnell, Cory
Message 4 of 9 (84 Views)

Re:

11-04-2002 09:17 PM in reply to: *JGH
I hear a voice shouting..."iparts"

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:0B379F46E26AC979D537F9F99B269597@in.WebX.maYIadrTaRb...
> I hear a voice whispering..."iparts"
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "John Bilton" wrote in message
> news:88A78787ACD8512398675814CECC7159@in.WebX.maYIadrTaRb...
> > I like the other undocumented feature that's included. Try inserting a
> socket head screw from
> > either ISO, BS or DIN libraries. Hmmm, lovely, we must all use ANSI
> standards (even us Europeans).
> >
> >
> > John Bilton
> > --
> > "It seemed like a good idea at the time..."
> >
> >
>
>
*Bilton, John
Message 5 of 9 (84 Views)

Re:

11-04-2002 09:20 PM in reply to: *JGH
>I hear a voice whispering..."iparts"

I can hear Charles as well

John Bilton
--
"It seemed like a good idea at the time..."
*JGH
Message 6 of 9 (84 Views)

Re:

11-04-2002 10:10 PM in reply to: *JGH
Iparts or content library, or whatever...this is included in the release, it
does not work, it`s a bug, should be fixed, sp1. (It`s nice when it works).

Jørgen


"John Bilton" wrote in message
news:B2F2DF5083C724E3DC824F77496977C6@in.WebX.maYIadrTaRb...
> >I hear a voice whispering..."iparts"
>
> I can hear Charles as well
>
> John Bilton
> --
> "It seemed like a good idea at the time..."
>
>
*Dotson, Sean
Message 7 of 9 (84 Views)

Re:

11-04-2002 10:36 PM in reply to: *JGH
Two different things. iParts and the content library are two different
things that achieve the same results. It's just that iparts are much more
versatile and editable. We are suggesting you use ipart and not the content
library. It's been a running joke for while.

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"JGH" wrote in message
news:E64F5CD873CBBEC009D47E0218CDED67@in.WebX.maYIadrTaRb...
> Iparts or content library, or whatever...this is included in the release,
it
> does not work, it`s a bug, should be fixed, sp1. (It`s nice when it
works).
>
> Jørgen
>
>
> "John Bilton" wrote in message
> news:B2F2DF5083C724E3DC824F77496977C6@in.WebX.maYIadrTaRb...
> > >I hear a voice whispering..."iparts"
> >
> > I can hear Charles as well
> >
> > John Bilton
> > --
> > "It seemed like a good idea at the time..."
> >
> >
>
>
Valued Contributor
Posts: 55
Registered: ‎11-07-2002
Message 8 of 9 (84 Views)

Re: Content Library Nuts ?

11-07-2002 10:08 PM in reply to: *JGH
For me it looks that Microsoft Excel is not instalated on computer with Inventor. Excel is necessary for reading thread information from Thread.xls file. If is not installated on computer with Inventor, infomation of thread like hole size is not read and hole has defaults size, usually small. Or uses deleted file Thread.xls, where information are stored. It could be verified /Excel installation/ by creation simple part wiht threaded hole - create cube /extrude square/ and hole with thread.

Applying SP1 situaton will be little bit different, without Excel hole size will be OK but without thread, simple hole only with correct diameter.

Jan Priban
Valued Contributor
Posts: 55
Registered: ‎11-07-2002
Message 9 of 9 (84 Views)

Re:

11-07-2002 10:37 PM in reply to: *JGH
I am able to insert ISO, BS, DIN socket head screw, these screws look good. Maybe you mean that is not possible to view other standrad than ANSI, view ANSI only. If it is this situation, then is necessary go to Configure dialog, /by clcik on Configure button in root of database/ , than edit local server and check standards like ISO, DIN, BS.
Jan Priban

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube