Inventor General

Reply
Member
Posts: 3
Registered: ‎06-22-2012
Message 1 of 7 (175 Views)

Content Center Sharing

175 Views, 6 Replies
06-22-2012 09:23 AM

Hello,

 

At my company we currently have a huge number of Autocad deployments for 2010,2011,2012.  Right now our deployments weren't setup to include the content centers.  I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files.  I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.  

*Expert Elite*
Cadmanto
Posts: 3,055
Registered: ‎12-07-2011
Message 2 of 7 (163 Views)

Re: Content Center Sharing

06-22-2012 10:24 AM in reply to: ajcwf9

Why don't you just install your content center on the network.  That is the way we have ours.

This way when you publish to it everyone sees it.

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Member
Posts: 3
Registered: ‎06-22-2012
Message 3 of 7 (159 Views)

Re: Content Center Sharing

06-22-2012 10:33 AM in reply to: ajcwf9

I don't have the capabilities to do that, and our IT department doesn't care enough to really help with solving this on a company wide basis.  For what we do in our office we don't need to share customized parts, but just have access to the things like nuts, bolts, standard channels, etc

 

*Expert Elite*
Cadmanto
Posts: 3,055
Registered: ‎12-07-2011
Message 4 of 7 (150 Views)

Re: Content Center Sharing

06-22-2012 11:03 AM in reply to: ajcwf9

Then your IT department is stunting the growth of engineering in my opinion.  :smileyfrustrated:

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Distinguished Mentor
ampster
Posts: 981
Registered: ‎07-26-2005
Message 5 of 7 (141 Views)

Re: Content Center Sharing

06-22-2012 12:18 PM in reply to: ajcwf9

to answer your question, yes you can do that.  However it will be a nightmare for models that use CC parts and someone else goes to open the model on a station that wasn't used to create the model.

 

You may want to consider also setting everybodies station to store the CC files on the network thru Application Options > File tab > Default Content Center Files.

 

You mentioned multiple versions of Inventor are being used - not sure if this will work since I believe the CC library will be version specific - could be wrong though.

 

HTH

 

Member
Posts: 3
Registered: ‎06-22-2012
Message 6 of 7 (135 Views)

Re: Content Center Sharing

06-22-2012 01:04 PM in reply to: ajcwf9

Agreed about the IT department.  As for everything else.....I re downloaded IV on my computer again except did not use the deployment.  It took nearly four hours going through everything and waiting on tech people.  I checked this twice...I put the idcl files from my personal computer on to my share drive here and pointed IV to look there and it worked.  Also I pointed it to the idcl files on my C drive buried way down deep in the Inventor files.  Both ways worked as far as I can tell.  I tried it on 2011 and didn't work, and I think that's because it might use a different file extension.  

 

As far as opening up parts on different work stations, we usually don't do that, I work in Process Engineering, so the main goal of this was to get quick standardized parts to check dimensions so we don't waste time measuring physical stock or guessing ordered stock dimensions.  Since the files don't cooperate between versions, I may download both 2011 and 2010 and get the library files for my co workers and have everyone copy them to their local machines.  Any problems with this?

 

Thanks for your support guys!

Employee
Posts: 297
Registered: ‎09-16-2005
Message 7 of 7 (125 Views)

Re: Content Center Sharing

06-22-2012 01:41 PM in reply to: ajcwf9

I can confirm that what is being discussed here is supported.

 

You can only actually install the CC library files to a local drive, but subsequently you can copy the .idcl files to a network share & then everyone can "point" to them from the setting on Tools, App Options, CC tab.

 

If you want to control who has write access to the library files then standard OS file permissions will provide that. If you want more control then using vault for housing your CC is the way to go.

 

Note that these .idcl files are the source files for the CC parts & are Inventor version specific. Once you have instantiated the parts in an assembly then the ipt's are created in the location as specified in your current project, which can either point to your application options default or can be overridden to be a network location too, depending on how your team/environment is configured.

 

Hope this helps,

Chris



Chris Mitchell
Inventor Customer Enagagement Team
Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube