Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there a way to dimension chamfers like in the second pic below so that the values update. You can do a linear dimension and then alter the text and try and find that dimension in the list, but the chamfer tool works well with two clicks but you only get it with a leader. I would like the same function but with a linear dimension sometimes. It would be good if you could choose it. 45° is probably not a really good example, but the leader version is not always so clear.
I think you'll just have to place a linear dimension and edit the text to add the angle. I haven't found any method to create a chamfer note in this way. Unfortunately, like you mentioned, the angle will not update automatically.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")