Inventor General

Reply
*mpower
Message 1 of 5 (30 Views)

Centerline Sore Spot

30 Views, 4 Replies
11-07-2002 10:33 PM
I have drawings that are in 1:12 scale, and when I add some sketched
centerlines, phantom lines, or whatever, the dashes and dots are so small
that when I print it they look like continuous lines. Is there a way to
make the scale of the lines increase, and if so can it be done
automatically? I use LTSCALE for this sort of thing in AutoCAD.
*Caldwell, Larry
Message 2 of 5 (30 Views)

Re: Centerline Sore Spot

11-07-2002 11:43 PM in reply to: *mpower
Have a look at the Standards dialog General tab. There is a scale field on
the right; you might try changing that.
~Larry

"mpower" wrote in message
news:3E0EBAF6FB3264351B48B095578EE2AB@in.WebX.maYIadrTaRb...
> I have drawings that are in 1:12 scale, and when I add some sketched
> centerlines, phantom lines, or whatever, the dashes and dots are so small
> that when I print it they look like continuous lines. Is there a way to
> make the scale of the lines increase, and if so can it be done
> automatically? I use LTSCALE for this sort of thing in AutoCAD.
>
>
*mpower
Message 3 of 5 (30 Views)

Re:

11-08-2002 02:05 AM in reply to: *mpower
Thanks, I just tried it and that does make the size of the dashes longer so
they are visible, but... my centermarks are now way to big. They went from
about 1" to 12" and look funny marking a 3/8 hole. Any other ideas?

"Larry Caldwell" wrote in message
news:E313C4DE1527302821E9F7FBF69ED132@in.WebX.maYIadrTaRb...
> Have a look at the Standards dialog General tab. There is a scale field on
> the right; you might try changing that.
> ~Larry
>
> "mpower" wrote in message
> news:3E0EBAF6FB3264351B48B095578EE2AB@in.WebX.maYIadrTaRb...
> > I have drawings that are in 1:12 scale, and when I add some sketched
> > centerlines, phantom lines, or whatever, the dashes and dots are so
small
> > that when I print it they look like continuous lines. Is there a way to
> > make the scale of the lines increase, and if so can it be done
> > automatically? I use LTSCALE for this sort of thing in AutoCAD.
> >
> >
>
>
*McConnell, Cory
Message 4 of 5 (30 Views)

Re:

11-08-2002 02:14 AM in reply to: *mpower
Use 2 different dim styles

--
Cory McConnell
BJ pipeline Inspection
"mpower" wrote in message
news:396E930206C838B092A158845E7D2724@in.WebX.maYIadrTaRb...
> Thanks, I just tried it and that does make the size of the dashes longer
so
> they are visible, but... my centermarks are now way to big. They went
from
> about 1" to 12" and look funny marking a 3/8 hole. Any other ideas?
>
> "Larry Caldwell" wrote in message
> news:E313C4DE1527302821E9F7FBF69ED132@in.WebX.maYIadrTaRb...
> > Have a look at the Standards dialog General tab. There is a scale field
on
> > the right; you might try changing that.
> > ~Larry
> >
> > "mpower" wrote in message
> > news:3E0EBAF6FB3264351B48B095578EE2AB@in.WebX.maYIadrTaRb...
> > > I have drawings that are in 1:12 scale, and when I add some sketched
> > > centerlines, phantom lines, or whatever, the dashes and dots are so
> small
> > > that when I print it they look like continuous lines. Is there a way
to
> > > make the scale of the lines increase, and if so can it be done
> > > automatically? I use LTSCALE for this sort of thing in AutoCAD.
> > >
> > >
> >
> >
>
>
*Caldwell, Larry
Message 5 of 5 (30 Views)

Re:

11-08-2002 03:19 AM in reply to: *mpower
You can set cL size in the Standards as well so I would imagine they could
be reduced by the same amount you increased the scale.
~Larry

"mpower" wrote in message
news:396E930206C838B092A158845E7D2724@in.WebX.maYIadrTaRb...
> Thanks, I just tried it and that does make the size of the dashes longer
so
> they are visible, but... my centermarks are now way to big. They went
from
> about 1" to 12" and look funny marking a 3/8 hole. Any other ideas?
>
> "Larry Caldwell" wrote in message
> news:E313C4DE1527302821E9F7FBF69ED132@in.WebX.maYIadrTaRb...
> > Have a look at the Standards dialog General tab. There is a scale field
on
> > the right; you might try changing that.
> > ~Larry
> >
> > "mpower" wrote in message
> > news:3E0EBAF6FB3264351B48B095578EE2AB@in.WebX.maYIadrTaRb...
> > > I have drawings that are in 1:12 scale, and when I add some sketched
> > > centerlines, phantom lines, or whatever, the dashes and dots are so
> small
> > > that when I print it they look like continuous lines. Is there a way
to
> > > make the scale of the lines increase, and if so can it be done
> > > automatically? I use LTSCALE for this sort of thing in AutoCAD.
> > >
> > >
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube