Inventor General

Reply
Member
1207463
Posts: 3
Registered: ‎01-13-2013
Message 1 of 5 (333 Views)
Accepted Solution

Cant extrude in assemble drawing

333 Views, 4 Replies
04-04-2013 11:51 AM

 

Can’t extrude in assemble drawing in inventor when I draw a sketch and finish sketch

And try to extrude the sketch it extrudes but only in cut mode  it is the only button that is working the rest are all faded out 

*Expert Elite*
Curtis_Waguespack
Posts: 2,780
Registered: ‎03-08-2006
Message 2 of 5 (331 Views)

Re: Cant extrude in assemble drawing

04-04-2013 11:53 AM in reply to: 1207463

Hi 1207463,

 

This is called an Assembly Feature. And that is just the way it works, you're only able to mill/remove material from the assembly level, if you need to add material just edit the part and create the sketch in that part.

 

The reason behind this goes something like this: Imagine we have a part that we make and stock in inventory, but in some assemblies we add a hole and a kerf notch to the part. We don't want these modifications in every place the part is used, so placing the feature at the assembly level let's us have this flexibility.

 

Also just as a tip, you might want to use the words "assembly file" rather than "assembly drawing". Typically in Inventor assembly drawing refers to a drawing file (IDW or DWG) that details an assembly. Same goes for "part file" vs. "part drawing".Just a minor point, but it helps make your questions easier to understand.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
Cadmanto
Posts: 3,179
Registered: ‎12-07-2011
Message 3 of 5 (319 Views)

Re: Cant extrude in assemble drawing

04-04-2013 12:04 PM in reply to: 1207463

Your best bet would be to RC on the part in the assembly browser and edit it within the assembly to add the protruded feature you need.

A specially if you are trying to create or do top down engineering.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! :smileyvery-happy:

Inventor.PNG     vault.PNG

 

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Member
1207463
Posts: 3
Registered: ‎01-13-2013
Message 4 of 5 (296 Views)

Re: Can't extrude in assemble drawing

04-04-2013 01:00 PM in reply to: Curtis_Waguespack

Thanks managed to work it out was doing it **** from elbow create sketch then create part on sketch 

*Expert Elite*
Cadmanto
Posts: 3,179
Registered: ‎12-07-2011
Message 5 of 5 (288 Views)

Re: Can't extrude in assemble drawing

04-04-2013 01:15 PM in reply to: 1207463

Marking this thread as solved and what exactly helped you would help others in the future with similar issues.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! :smileyvery-happy:

 

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube