Inventor General

Reply
*Expert Elite*
sam_m
Posts: 579
Registered: ‎11-05-2003
Message 11 of 25 (420 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 05:43 AM in reply to: cbenner

I was tempted to do post it in mm, not converted to mm but at 2.25mm tall...  But hey, got my own work to do

----------
Please mark this response as "Accept as Solution" if it answers your question...
but please understand that the solution may not be the answer you're wanting to hear...

If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love :smileyvery-happy:

Lithium - helping nntp users with mania, depression and headaches
Distinguished Mentor
ampster
Posts: 988
Registered: ‎07-26-2005
Message 12 of 25 (404 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 06:40 AM in reply to: CannonInc

drawn in Inventor 2011, but you can use it in 2012.

 

No part file needed, just sketched a drawing for you.

 

HTH

Distinguished Contributor
Posts: 640
Registered: ‎02-25-2009
Message 13 of 25 (394 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 06:51 AM in reply to: sam_m

Good one amp. :smileyhappy:

Distinguished Mentor
ampster
Posts: 988
Registered: ‎07-26-2005
Message 14 of 25 (373 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 07:40 AM in reply to: dick_upton

OP did say need help drawing...

 

LOL

*Expert Elite*
Posts: 1,021
Registered: ‎09-03-2008
Message 15 of 25 (335 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 08:59 AM in reply to: Rich.O.3d

I don't see any image attachments either.  I'm using Firefox, just updated to version 11 yesterday.

 

Anyone else using Firefox 11 who can't see the OP's image?

*Expert Elite*
mrattray
Posts: 2,241
Registered: ‎09-13-2011
Message 16 of 25 (315 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 09:26 AM in reply to: cwhetten

I was on Firefox 11 and could see it. I went to check my version to make sure and it updated itself to 12. Still see it.

Mike (not Matt) Rattray

*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 17 of 25 (279 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 10:19 AM in reply to: CannonInc

Here you go....took me all of 10 minutes and I had a few emails to answer during that time.

 What do you need help with? It's a pretty simply part. I'm not going to give you the actual file of course, that you'll have to do on your own, but I get the feeling that's what you are trying to avoid....for whatever reason.

 

no6.JPG

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
Posts: 1,021
Registered: ‎09-03-2008
Message 18 of 25 (250 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 11:53 AM in reply to: mrattray

mrattray wrote:

...I went to check my version to make sure and it updated itself to 12. Still see it.


Ha ha!  Mine did the same thing! :smileylol:

 

Still don't see it, though... :smileysad:

 

I posted about this issue on the Discussion Groups Feedback board here:

 

http://forums.autodesk.com/t5/Autodesk-Discussion-Groups/Attached-images-not-showing/m-p/3428479/mes...

*Expert Elite*
mrattray
Posts: 2,241
Registered: ‎09-13-2011
Message 19 of 25 (246 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 11:56 AM in reply to: cwhetten

My guess would be that you're missing an extension. Here's a cap of my extensions (and an excuse to test another image for you).

 

capture.jpg

Mike (not Matt) Rattray

Valued Mentor
Rich.O.3d
Posts: 509
Registered: ‎08-19-2008
Message 20 of 25 (213 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 05:10 PM in reply to: mrattray

Im using chrome...i see your add-ins image but still dont see the op's image

 

I call our IT the 'Special Host Info Tech Dept...S.H.I.T. for short

We use HP to host our IT services (major Intnl company) they send us z800 workstations (about 12k worth of pc - quadro5000 cards xeon chips etc) but image the machines with XP so half the opengl instruction set doesnt work properly, dont even mention directx.

 

they block all streamed vid (cant even use the https trick) 

has anyone got anyidea what addins or patches i would need?

CAD Management 101:
You can do it your own way,
If its done just how I say!
[Metallica:And Justice For All:1988]

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube