Inventor General

Reply
Contributor
Posts: 14
Registered: ‎09-12-2012
Message 1 of 4 (256 Views)

Bolted Connection

256 Views, 3 Replies
10-31-2012 08:02 AM

Hi,

   Using bolted connection, I want to place a bolt through 3 sheets of metal. The first 2 sheets i want it to automatically place a slightly larger hole (which it does) but I want the 3rd sheet to be threaded so the bolt thread and hole thread are the same size. What is the best way of going about this problem.

 

Thanks in advance, Craig

Mentor
Posts: 521
Registered: ‎07-14-2004
Message 2 of 4 (246 Views)

Re: Bolted Connection

10-31-2012 09:20 AM in reply to: craigzcool

Just create the threaded hole beforehand.  If you are relatively new to Inventor, I would make one more suggestion - place all holes beforehand.  I have used bolted connection since it first came out and you will run into more problems if you let it make the holes for you.  Just my $0.02.

 

 

Rob

Contributor
Posts: 14
Registered: ‎09-12-2012
Message 3 of 4 (243 Views)

Re: Bolted Connection

10-31-2012 09:25 AM in reply to: RobJV

I found the solution in the end, by modifying the hole type from 'normal' to 'threaded' ... thanks for the help though :smileyhappy:

 

Craig

Mentor
Posts: 521
Registered: ‎07-14-2004
Message 4 of 4 (237 Views)

Re: Bolted Connection

10-31-2012 09:40 AM in reply to: craigzcool

Although I agree with you - that is the intended way to do it, (Press "..." next to the hole in bolted connection dialog and change to threaded) my last email was just a cautionary one that more often than not, the holes created through the bolted connection generator will cause issues down the road.  If you don't edit things often you should be OK.

 

Rob 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube