Inventor General

Reply
Active Member
ndogg1080
Posts: 6
Registered: ‎09-12-2007
Message 1 of 46 (597 Views)

Ball End Mill Sweep

597 Views, 45 Replies
11-20-2008 12:20 PM
Is there a way to do a clean sweep that imitates the shape a ball end mill? I'm trying to create a path that has 90 degree bends and whose end product looks like it was cut by a ball end mill. If there's a way to avoid sweeping the straight areas and then revolving the corners, I'd be happy to know.

Thanks!
*Expert Elite*
JDMather
Posts: 26,246
Registered: ‎04-20-2006
Message 2 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 12:41 PM in reply to: ndogg1080
Something like this?
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
ndogg1080
Posts: 6
Registered: ‎09-12-2007
Message 3 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 12:45 PM in reply to: ndogg1080
Could you please save in Inventor 2008 format?

Thanks...
*Expert Elite*
JDMather
Posts: 26,246
Registered: ‎04-20-2006
Message 4 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 12:47 PM in reply to: ndogg1080
No
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
mcgyvr
Posts: 6,708
Registered: ‎12-01-2004
Message 5 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 12:51 PM in reply to: ndogg1080
and technically thats not the correct shape a ball end mill will leave. If you need that actual path/shape that a ball end mill will create you need additional steps besides a simple sweep.

see attached Edited by: mcgyvr on Nov 20, 2008 3:53 PM
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Active Member
ndogg1080
Posts: 6
Registered: ‎09-12-2007
Message 6 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 01:07 PM in reply to: ndogg1080
Could you save in IGES or STP format?

Did you use the REVOLVE function at the corners?

Thanks.
*Expert Elite*
mcgyvr
Posts: 6,708
Registered: ‎12-01-2004
Message 7 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 01:13 PM in reply to: ndogg1080
Yes you need to do a straight sweep first, then revolve (cut) at the end of the sweep to get the rounded end, then another sweep perpendicular into the center of the revolve.

So 2 straight sweeps and 1 revolve to make a right angle.



attached is the step file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


*Expert Elite*
JDMather
Posts: 26,246
Registered: ‎04-20-2006
Message 8 of 46 (597 Views)

Re: Ball End Mill Sweep

11-20-2008 02:31 PM in reply to: ndogg1080
>...and technically thats not the correct shape a ball end mill will leave

Here is the result I got in another SoftWare that will allow swept cut of one solid body through another.
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
ndogg1080
Posts: 6
Registered: ‎09-12-2007
Message 9 of 46 (597 Views)

Re: Ball End Mill Sweep

11-21-2008 05:02 AM in reply to: ndogg1080
That's what I'm looking for. What software did you use to make that?
New Member
SJShaw
Posts: 2
Registered: ‎03-21-2008
Message 10 of 46 (597 Views)

Re: Ball End Mill Sweep

11-21-2008 05:18 AM in reply to: ndogg1080
Created this in Inventor 2008 using an extruded cut feature and a couple of fillets.

Steve

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube