Inventor General

Reply
Member
Fefas
Posts: 3
Registered: ‎03-07-2012
Message 1 of 5 (142 Views)
Accepted Solution

Assemble Multiple leds on matrix

142 Views, 4 Replies
09-26-2012 06:02 AM

Guys,

 

I am assembling multiples leds on a matrix that I made.

 

Is there any way to make the assembly using constrains to place the ipt LED design on the matrix without placing one by one?

 

The constrain I am using for each led is Insert.

 

There got to be a way to insert the leds directly, like when you are placing screws and it detects all holes and places the necessary number os screws on the existing holes.

 

Any Idea will be aprecciated.

 

Thanks

 

Fefas

*Expert Elite*
Cadmanto
Posts: 3,175
Registered: ‎12-07-2011
Message 2 of 5 (137 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 06:13 AM in reply to: Fefas

Fefas,

Have you looked into patterning?

pattern.JPG

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

*Expert Elite*
JDMather
Posts: 26,156
Registered: ‎04-20-2006
Message 3 of 5 (124 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 07:32 AM in reply to: Fefas

If you created the holes in the original part with a Feature Pattern you can use that same part Feature Pattern to place the LEDs in the assembly.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Fefas
Posts: 3
Registered: ‎03-07-2012
Message 4 of 5 (122 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:08 AM in reply to: Cadmanto

Thanks Scott,

 

It worked. I don't know how I haven't noticed that on the assembly I could use the patter tool.

 

Thanks

*Expert Elite*
Cadmanto
Posts: 3,175
Registered: ‎12-07-2011
Message 5 of 5 (115 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:12 AM in reply to: Fefas

We all over look things at time.  Glad it was that easy.

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube