Inventor General

Reply
Member
Posts: 3
Registered: ‎03-07-2012
Message 1 of 5 (139 Views)
Accepted Solution

Assemble Multiple leds on matrix

139 Views, 4 Replies
09-26-2012 06:02 AM

Guys,

 

I am assembling multiples leds on a matrix that I made.

 

Is there any way to make the assembly using constrains to place the ipt LED design on the matrix without placing one by one?

 

The constrain I am using for each led is Insert.

 

There got to be a way to insert the leds directly, like when you are placing screws and it detects all holes and places the necessary number os screws on the existing holes.

 

Any Idea will be aprecciated.

 

Thanks

 

Fefas

*Expert Elite*
Cadmanto
Posts: 3,066
Registered: ‎12-07-2011
Message 2 of 5 (134 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 06:13 AM in reply to: Fefas

Fefas,

Have you looked into patterning?

pattern.JPG

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

*Expert Elite*
Posts: 25,323
Registered: ‎04-20-2006
Message 3 of 5 (121 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 07:32 AM in reply to: Fefas

If you created the holes in the original part with a Feature Pattern you can use that same part Feature Pattern to place the LEDs in the assembly.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Posts: 3
Registered: ‎03-07-2012
Message 4 of 5 (119 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:08 AM in reply to: Cadmanto

Thanks Scott,

 

It worked. I don't know how I haven't noticed that on the assembly I could use the patter tool.

 

Thanks

*Expert Elite*
Cadmanto
Posts: 3,066
Registered: ‎12-07-2011
Message 5 of 5 (112 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:12 AM in reply to: Fefas

We all over look things at time.  Glad it was that easy.

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube