Inventor General

Reply
Distinguished Contributor
Posts: 880
Registered: ‎05-09-2005
Message 1 of 5 (849 Views)

Anyone using Aras?

849 Views, 4 Replies
11-24-2010 11:08 AM

There's some spectulative thought at my company of implementing a PLM system from Aras; curious if anyone had insights on how well it works with Inventor.

KState92
Inventor Professional 2014 64 SP1 Update 3
Windows 7 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 4000
*Pro
Posts: 1,369
Registered: ‎12-15-2003
Message 2 of 5 (805 Views)

Re: Anyone using Aras?

11-25-2010 06:36 AM in reply to: kstate92

I'm currently unable to access the ARAS site ( http://aras.com )  It may be temporariliy down.

 

However, I looked at it and it seems to be a good tool for progammers. It is open source (free), but must be customized  for use.  You need to count in the cost of customization when comparing it to ready to use applications. I'll bet that the purchased apps will beat the free ones in overall cost of implementation and usage.

 

Do you have special requirements that purchased apps cannot supply?

Please mark this response as "Accept as Solution" if it answers your question.
____________________________________________________________
Dennis Jeffrey, Author and Manufacturing Trainer, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert
Autodesk Silver Manufacturing Partner

Subscribe to the free digital "The Creative Inventor Magazine" now available at: http://teknigroup....

XP64 SP2, GeForce 9800GT-1GB, Driver: 6.14.12.7061, 8GB Ram, AMD Athlon II 3.2 Ghz
Laptop: Win7-64 Pro, 4GB, ATI Graphics on board, 2012 Ultimate, IV2011 or 2010 Pro, all SP's
Mentor
Steve_Bahr
Posts: 187
Registered: ‎10-06-2008
Message 3 of 5 (779 Views)

Re: Anyone using Aras?

11-26-2010 07:10 AM in reply to: kstate92

Interesting how Aras's website has a link to Siemens' website.  Why is it that no one seems to care about PLM except Siemens?

 

A Company in one of my previous lives drank the kool-aid.  PLM did absolutely nothing except cost more and more as implementation progressed.  The vendor, while proclaiming that he really understood the business, was in a complete fog.  It was like watching a guy step on a rake, only to turn around and step on another rake.  Finally, after two years and absolutely no measurable benefit, the Company gave up on it.

 

I hope your guys really do their research.  PLM pretends to offer a lot of benefit, but in my obviously bitter opinion, it's nothing but fluff.  But who knows, maybe it'll turn out ok for you.

 

I'm just sayin'.

Steve Bahr...since 1962.
______________________________________________________________
Please mark this response as "Accept as Solution" if I was successful in answering your question.
Distinguished Contributor
Posts: 880
Registered: ‎05-09-2005
Message 4 of 5 (736 Views)

Re: Anyone using Aras?

11-29-2010 05:25 AM in reply to: Dennis_Jeffrey

I'm not really in the loop about it and I think it's just in the looking around phase.  We're a disparate constellation of companies in the same basic business.  With the exception of about 2/3rds of the companies on the same ERP system, we're all rather stand alone with no real commonality in methods or even CAD systems.  For instance; our ECN system is just an Access db with no tie-in to the ERP other than us looking up numbers and dates and manually filling them in.  Our BOMs and parts lists are the same except in reverse (pull next numbers from the ERP, create an Engineering BOM in a customized app and send that to Production for them to assemble into a real BOM within the ERP system).

I guess we're like a lot of folks, where doing changes and updating decades-old BOMs and drawings takes far more time than doing anything new from scratch.  But maybe the idea of a more integrated system that saves time and effort is more fantasy than reality.  I was just curious if anyone had any horror stories about this particular system - though as usual in the ERP/PLM/Buzzword world, their website is far from concrete, vaguely promising all things for all scenarios, with concrete explanations of actual software packages hard to devine.

KState92
Inventor Professional 2014 64 SP1 Update 3
Windows 7 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 4000
New Member
MarcL_
Posts: 1
Registered: ‎08-23-2011
Message 5 of 5 (512 Views)

Re: Anyone using Aras?

08-23-2011 04:16 PM in reply to: kstate92

Just ran across this post, am with Aras and seems like there might be some misunderstanding about our PLM solution in the previous responses.

 

If you need a PLM system that is Item-based as opposed to File-based and includes out-of-the-box functionality for Engineering BOM, parts, materials, Approved Vendors, alternates & substitutes, design-to-goal, product costing, etc that’s integrated with project management and has enterprise change workflows… then Aras might be worth checking out.

 

Under the covers is an advanced PLM platform that is fully customizable (but you don’t have to do any customizing to use the system). It’s browser-based and highly scalable, extensible and has open Web services APIs for enterprise integration if you need to tie it into existing systems at your company.
 
The OOTB PLM solutions are freely available as enterprise open source, which means there are no PLM license fees… we sell optional subscription packages, consulting and training (that’s how we make $$). Your call if you want to buy something or just use it for free (if use for free, just pls ask questions in the forums - our support people are for subscribers :-)

 

There are also packaged integration connectors for Inventor and AutoCAD (these are 3rd party add-on products which typically cost money… although there is an open source AutoCAD connector available from Minerva France).

 

Also, should say that if you've already got Vault, you can use it with Vault instead of the rip & replace situation other PLM systems require.

 

Aras runs on Microsoft SQL server, Windows Server, IIS and .NET and users access with standard IE browser. If you know what you’re doing, you can download & install in under an hour and be loading users and data by the afternoon.

Here are some links that might be helpful:
solution overview http://www.aras.com/solutions/
screenshots http://www.aras.com/screenshots/
video demo http://www.aras.com/getting-started/videos-demos.aspx
documentation http://www.aras.com/support/documentation/
support forums http://www.aras.com/community/forums/
Aras PLM software download http://www.aras.com/downloads/

 

Hope this helps.

 

MarcL

@Aras_PLM

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube