Annoying New iPart Bug (try it, it's fun!)

[Anonymous]

Make a cube 1 x 1 x 1. Make an ipart from this and import all three
parameters. Edit the ipart via Excel. Copy these three columns down at
least 100-200 rows worth. Exit the excel sheet.

Now you remember you wanted to include a property. Edit the table (via the
iPart table) and select any property that doesn't have a value already
(let's say category). Exit the table.

Now see if you can get this message box that extents way off your screen, to
go away... (hits below)
















(hit tab then enter)....

That's a new annoying one for R6.....

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------

[Anonymous]

Bit funny, was just working on my "End cap" ipart and this stupid message
box shows up...... I figured out the enter key

KEG


"Sean Dotson" skrev i melding
news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> parameters. Edit the ipart via Excel. Copy these three columns down at
> least 100-200 rows worth. Exit the excel sheet.
>
> Now you remember you wanted to include a property. Edit the table (via
the
> iPart table) and select any property that doesn't have a value already
> (let's say category). Exit the table.
>
> Now see if you can get this message box that extents way off your screen,
to
> go away... (hits below)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> (hit tab then enter)....
>
> That's a new annoying one for R6.....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
>
>

[Anonymous]

Sean,

I've logged this issue.

Thanks,
Rich Willis (Autodesk)


"Sean Dotson" wrote in message
news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> parameters. Edit the ipart via Excel. Copy these three columns down at
> least 100-200 rows worth. Exit the excel sheet.
>
> Now you remember you wanted to include a property. Edit the table (via
the
> iPart table) and select any property that doesn't have a value already
> (let's say category). Exit the table.
>
> Now see if you can get this message box that extents way off your screen,
to
> go away... (hits below)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> (hit tab then enter)....
>
> That's a new annoying one for R6.....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
>
>

[Anonymous]

I brought that up a couple of months ago. Didn't get an answer from
anybody. I hit the left arrow and enter.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> parameters. Edit the ipart via Excel. Copy these three columns down at
> least 100-200 rows worth. Exit the excel sheet.
>
> Now you remember you wanted to include a property. Edit the table (via
the
> iPart table) and select any property that doesn't have a value already
> (let's say category). Exit the table.
>
> Now see if you can get this message box that extents way off your screen,
to
> go away... (hits below)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> (hit tab then enter)....
>
> That's a new annoying one for R6.....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
>
>

[Anonymous]

Sorry Cory, didn't see that post...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"Cory McConnell" wrote in message
news:0EB1ADDF812718AD206B34009080E107@in.WebX.maYIadrTaRb...
> I brought that up a couple of months ago. Didn't get an answer from
> anybody. I hit the left arrow and enter.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Sean Dotson" wrote in message
> news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> > Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> > parameters. Edit the ipart via Excel. Copy these three columns down at
> > least 100-200 rows worth. Exit the excel sheet.
> >
> > Now you remember you wanted to include a property. Edit the table (via
> the
> > iPart table) and select any property that doesn't have a value already
> > (let's say category). Exit the table.
> >
> > Now see if you can get this message box that extents way off your
screen,
> to
> > go away... (hits below)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > (hit tab then enter)....
> >
> > That's a new annoying one for R6.....
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> >
> >
>
>

[Anonymous]

That's alright - I just assumed it was something I did when I was
floundering around.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:F76E10695B10EA135130D9BAF7F3AEAC@in.WebX.maYIadrTaRb...
> Sorry Cory, didn't see that post...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:0EB1ADDF812718AD206B34009080E107@in.WebX.maYIadrTaRb...
> > I brought that up a couple of months ago. Didn't get an answer from
> > anybody. I hit the left arrow and enter.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Sean Dotson" wrote in message
> > news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> > > Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> > > parameters. Edit the ipart via Excel. Copy these three columns down
at
> > > least 100-200 rows worth. Exit the excel sheet.
> > >
> > > Now you remember you wanted to include a property. Edit the table
(via
> > the
> > > iPart table) and select any property that doesn't have a value already
> > > (let's say category). Exit the table.
> > >
> > > Now see if you can get this message box that extents way off your
> screen,
> > to
> > > go away... (hits below)
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > (hit tab then enter)....
> > >
> > > That's a new annoying one for R6.....
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > >
> > >
> >
> >
>
>

[Anonymous]

Thanks Rich

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"Rich Willis (Autodesk)" wrote in message
news:E155154DCBD661B9B7E2F6A7F6559381@in.WebX.maYIadrTaRb...
> Sean,
>
> I've logged this issue.
>
> Thanks,
> Rich Willis (Autodesk)
>
>
> "Sean Dotson" wrote in message
> news:878E4796E0616693BA370A6B09EB95BF@in.WebX.maYIadrTaRb...
> > Make a cube 1 x 1 x 1. Make an ipart from this and import all three
> > parameters. Edit the ipart via Excel. Copy these three columns down at
> > least 100-200 rows worth. Exit the excel sheet.
> >
> > Now you remember you wanted to include a property. Edit the table (via
> the
> > iPart table) and select any property that doesn't have a value already
> > (let's say category). Exit the table.
> >
> > Now see if you can get this message box that extents way off your
screen,
> to
> > go away... (hits below)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > (hit tab then enter)....
> >
> > That's a new annoying one for R6.....
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> >
> >
>
>