Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I was trying to export a BMP of a shaded view of an assembly. Everything
looked good except the screws had lost there threads. A tried saving as a
JPEG and the same problem happened. Is this new to SP2 or did SP1 do it
too.
No threads for me as shown in fastener with integral bmp. SP2
--
Laurence,
Power is nothing without Control
---
"KJohnson" wrote in message
news:881DF17B6CF69A69AF4D843EF63868C7@in.WebX.maYIadrTaRb...
> I was trying to export a BMP of a shaded view of an assembly. Everything
> looked good except the screws had lost there threads. A tried saving as a
> JPEG and the same problem happened. Is this new to SP2 or did SP1 do it
> too.
>
> Kathy Johnson
>
>
Ah it was ok in 5.3, another trim up...........or is it trim down :((
IV 6.0 a lean mean ugly machine.
--
Laurence,
Power is nothing without Control
---
"Mark Triton" wrote in message
news:f140cf1.1@WebX.maYIadrTaRb...
> Could it be because it's a bitmap of a bitmap? I don't know - just a
> conjecture.
>
> Mark
>
>
Even more things that got broke. Oh well. I just finished drawing the
trails in by hand for some shaded marketing views. Not too bad. They are
only about 10 parts each. I would not use a shaded view for large tweaked
assembly views now. Which is too bad as the shaded views looked better and
production could see the parts better.
What about the good old-fashioned PrintScreen screen capture method?
"KJohnson" wrote in message
news:881DF17B6CF69A69AF4D843EF63868C7@in.WebX.maYIadrTaRb...
> I was trying to export a BMP of a shaded view of an assembly. Everything
> looked good except the screws had lost there threads. A tried saving as a
> JPEG and the same problem happened. Is this new to SP2 or did SP1 do it
> too.
>
> Kathy Johnson
>
>
If that includes fixing the drawing module ...
you'betcha. Of course there are some features that need to be added in order to
fix the drawing module; those need to be included IMWO.
