Eric,
The Quadro4 900XGL is just running fine, no major slowdowns or quirks. Only
problem so far is as described the 5 minutes off, and some random delay when
zooming with the mousewheel.
I'm running the 40.41 driver from the time when it was still beta (so the
windows display prop dialog crashes)
I'm running the standard setup Dell and later on the beta driver (or IV6
respectively) provided.
Well, IV6 is slow in graphic anyway...
--
Leo Laimer
Maschinen- und Fertigungstechnik
A-4820 Bad Ischl - Austria
"Eric Zirkle" <@> schrieb im Newsbeitrag
news:BEF6183A3C7D14B5023A4C2C42268966@in.WebX.maYIadrTaRb...
> Leo,
> Have you noticed any graphic slowdowns with your 900XGL? We have a couple
> here and they are performing awful. If yours is running good what driver
and
> tweaks are you running?
>
> "Leo Laimer" wrote in message
> news:1B60D17A751287CB641110515B3F2E67@in.WebX.maYIadrTaRb...
> > Well - this is the only major slowdown I was seeing so far, but my
> coworker,
> > who designed the whole beast was complaining about many slowdowns,
amongst
> > them what is called here the pregnant pause. But he has a medium powered
> PC
> > only, a 1.2GHz AMD with a Gloria III, mine is 2.53GHz P4 with a Quadro4
> > 900XGL.
> >
> > Regards,
> > --
> > Leo Laimer
> > Maschinen- und Fertigungstechnik
> > A-4820 Bad Ischl - Austria
> >
> >
> > "Dave Cleveland" schrieb im Newsbeitrag
> > news:B45BA48B714468A407B77E9074CF2D28@in.WebX.maYIadrTaRb...
> > > Yes, I've been noticing (and complaining) about this since starting
R6 -
> > > hoping I wasn't the only one.
> > >
> > > For example, in a 60 part assembly (not crowded IMO), changing the
value
> > of
> > > a mate constraint takes about 15 seconds of waiting. If I try to spin
a
> > > part that is rotationally unconstrained, nothing happens for 10-15
> > seconds.
> > > Other assemblies that were migrated at the same time, work quite
> normally
> > as
> > > they did in 5.3. I suspect my wait times would be several minutes on
a
> > > large assembly. I'm accustomed to this stuff happening as fast as I
can
> > > spin the ball and click the mouse. (dual AMD 2100's and 2 Gb ram)
> > >
> > > Your exact problem is not occurring on my machine anymore. After
> > > uninstalling and reloading, some things seem to be marginally better
but
> > the
> > > wait times for updates are still unbearable. Do you see the slowdown
> with
> > > other types of assembly edits?
> > >
> > >
> > >
> > >
> >
> >
>
>