As a part of my course, I am supposed to do 1 D stress analysis.
It was possible in ANSYS.
But how to do that in AD Inventor? (I can do basic 3 D stress analysis, bu I need to know how to do 1D)
So, is it possible in AD Inventor 2011 or only 3 D stress analysis is possible?
Thanks in advance for your reply.
Solved! Go to Solution.
What is the design geometry - can you post an example file?
Are you familiar with the Design Accelerators - beam/column/plate?
My problem is, there is a beam hanging vertically, to which an axial force of 100N is applied.
Now I have to find out the elongation using 1D spar element in ANSYS.
I have to do it as 1D only.
So in ANSYS I will first select the spar element, then draw a line whose length will be same
as that of the beam and th cross-sectional area of the beam is entered seperately in a dialog box that corresponds to the 1D spar element.
So, my question is to know whether I can do it in Autodesk Inventor or not?
Please see the picture at http://www.mece.ualberta.ca/tutorials/ansys/BT/Tru
It is simillar to this, i need to model in Autodek Inventor. I am aware that the truss can be modelled in 3 D.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.