Inventor General Discussion

Reply
New Member
tr12311
Posts: 1
Registered: ‎11-20-2006
Message 1 of 9 (547 Views)

"[WARNING] The feature as specified did not change the number of faces..."

547 Views, 8 Replies
11-20-2006 03:26 AM
Inventor 9 Gives this warning after creating a patterned hole feature in the flange of a sheet metal part. I tried editing the depth of this hole feature but didn't help.
Removing and re-doing holes didn't help either.

What to do?

Here's the complete warning text about two different hole features with same problem.

[WARNING] Edit Hole Feature: problems encountered while executing this command. [r:\core\Fw\Main\FWxApp.cpp, line 3593]
[WARNING] IV-0003.ipt: Warnings occurred during update [r:\core\Rd\Main\Component.cpp, line 522]
[WARNING] Hole5: Problems occurred while building this Hole [r:\core\Rd\Main\Feature.cpp, line 229]
[WARNING] The feature as specified did not change the number of faces (and may not have affected the part). Accept the feature that resulted, or use Edit Sketch or Edit Feature to change the feature definition. [r:\core\rd\rddiagnoses.h, line 957]
[WARNING] Hole7: Problems occurred while building this Hole [r:\core\Rd\Main\Feature.cpp, line 229]
[WARNING] The feature as specified did not change the number of faces (and may not have affected the part). Accept the feature that resulted, or use Edit Sketch or Edit Feature to change the feature definition. [r:\core\rd\rddiagnoses.h, line 957]
*Expert Elite*
JDMather
Posts: 26,325
Registered: ‎04-20-2006
Message 2 of 9 (547 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

11-20-2006 04:57 AM in reply to: tr12311
Can you zip and post the file or recreate the same problem in a new file?
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
jejp
Posts: 13
Registered: ‎12-12-2006
Message 3 of 9 (547 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

02-20-2007 07:02 AM in reply to: tr12311
I have the same problem!!!

Did you ever manage to resolve this?

JP
Distinguished Contributor
KristinaVogt5
Posts: 200
Registered: ‎06-22-2005
Message 4 of 9 (547 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

02-20-2007 08:48 AM in reply to: tr12311
This message shows up generally when your added feature didn't change the part.

I can only guess what your part looks like, but for holes here are the two things to check...

Check if your hole center is on the part.
Check if the hole cut direction in cutting into the part.

If this doesn't help, maybe post a picture of you problem and what version of IV you are using.
Distinguished Contributor
shekarsub[Autodesk]
Posts: 2,198
Registered: ‎05-09-2005
Message 5 of 9 (547 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

02-20-2007 09:00 AM in reply to: tr12311
Like Vogt said, if the feature didn't change anything then this error message comes up. Example: You have a hole in a block. Now you create another hole of same size at the same hole center point on the block then you get the error message. This also happens in other situations too. Every new feature should result in a change in the model. If it dosen't change then we put this message.

1. Open the part
2. Move EOP above Hole5
3. Is Hole5's resulting shape already there? Meaning has the hole been already cut through another feature.
4. The same thing might be happening for Hole7
If the hole5's resulting shape is not already there and you think the software is complaining then we need to log an issue.

Thanks

shekar
Distinguished Contributor
rblawson
Posts: 147
Registered: ‎05-09-2006
Message 6 of 9 (547 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

02-21-2007 06:52 AM in reply to: tr12311
You need to use the "adjust" option in the compute dialog in the feature pattern window.

"Identical" tries to match the shape of the feature.

"Adjust" tries to match the intent of the feature.

JD mather discusses the difference in his most excellent tips .pdf that's here:

http://home.pct.edu/~jmather/AU2006/MA13-3%20Mather.pdf
Distinguished Contributor
nstalker
Posts: 180
Registered: ‎03-16-2012
Message 7 of 9 (269 Views)

Re: "[WARNING] The feature as specified did not change the number of faces..."

09-25-2013 10:59 AM in reply to: rblawson

I ran into this error and fixed it by changing my extrusion to be a new solid.

*Expert Elite*
JDMather
Posts: 26,325
Registered: ‎04-20-2006
Message 8 of 9 (259 Views)

Re: "[WARNING] The feature as specified did not change the number of faces.

09-25-2013 11:36 AM in reply to: nstalker

nstalker wrote:

I ran into this error and fixed it by changing my extrusion to be a new solid.


Is that really really the solution? Depends!
Attach your file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
mrattray
Posts: 2,471
Registered: ‎09-13-2011
Message 9 of 9 (243 Views)

Re: "[WARNING] The feature as specified did not change the number of faces.

09-25-2013 05:31 PM in reply to: nstalker
Sounds like your doing too much work to me...
Mike (not Matt) Rattray

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube