Inventor General Discussion

Reply
Active Contributor
harold_kennedy
Posts: 29
Registered: ‎11-03-2012
Message 1 of 9 (1,025 Views)

propeller

1025 Views, 8 Replies
12-07-2012 04:12 AM

Hi all

 

How are complex shapes created in Inventor.I have started a propeller but at this point am only able to do the hub.Could a sample be posted in Inventor 2013 on how to create the propeller blades.Is this modelling for this shape done with surface modelling or can it be created with solid modelling technique?

It would be good if a sample is posted of how you would model the blade as such in the picture

 

Best Regards

 

Harold

Inventoir 2013 Education version

*Expert Elite*
JDMather
Posts: 26,282
Registered: ‎04-20-2006
Message 2 of 9 (1,022 Views)

Re: propeller

12-07-2012 04:22 AM in reply to: harold_kennedy

This question has been asked here several times in the past.

If a search doesn't turn up a solution, post back and I'm sure someone will post an example solution.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
harold_kennedy
Posts: 29
Registered: ‎11-03-2012
Message 3 of 9 (1,015 Views)

Re: propeller

12-07-2012 04:47 AM in reply to: JDMather

I did a quick search..not much to go on..hopefully someone will post an example

*Expert Elite*
JDMather
Posts: 26,282
Registered: ‎04-20-2006
Message 4 of 9 (988 Views)

Re: propeller

12-07-2012 07:42 AM in reply to: harold_kennedy

Check this one first, them I'll find some others

http://forums.autodesk.com/t5/Autodesk-Inventor/Boat-prop-models/m-p/1533804#M179996

 

Oops, never mind - the how to on that one is dead.

Let me look some more.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Mentor
Mason-Paul
Posts: 298
Registered: ‎04-04-2012
Message 5 of 9 (975 Views)

Re: propeller

12-07-2012 09:01 AM in reply to: harold_kennedy

The attached 4 page PDF, (Version 6 most PFD readers will open this version) file may be of some help, page 4 of this file may give a suggestions as how to proceed by using a series of sketches at the calculated pitch angle and one or more of the profile to form a series of lofts

================
Inventor 2014 Pro

HP xw8400 workstation
2 x Xeon duel-core 3Ghz CPU , 32 GB Ram
64bit Windows 7 Pro

AMD FirePro V3900 (ATI FireGL) (1GB RAM)
=================
Ashington Northumberland (UK) ~ Home to the WORLD FAMOUS Pitman Painters Group
Valued Mentor
stevec781
Posts: 680
Registered: ‎05-29-2009
Message 6 of 9 (863 Views)

Re: propeller

12-11-2012 06:25 AM in reply to: Mason-Paul

A propeller is just a screw so use the coil tool.

 

Draw the cross section

Use coil to input pitch

Sketch the projected blade area shape that you want and cut it down to 1 blade

pattern the blade.

 

Not an exact method for production but good enough to make a simple model for visualisation

Valued Mentor
mpatchus
Posts: 451
Registered: ‎10-22-2008
Message 7 of 9 (843 Views)

Re: propeller

12-11-2012 09:11 AM in reply to: Mason-Paul

I used to use prop data similar to this as an excercise for my advanced students.  It usually gave most of them fits, but occaisionally one would solve it. 

I've included the files (Inventor 2012) if you wish to see how this model was constructued.

Prop.JPG

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
*Expert Elite*
JDMather
Posts: 26,282
Registered: ‎04-20-2006
Message 8 of 9 (841 Views)

Re: propeller

12-11-2012 09:16 AM in reply to: mpatchus

Harold - are you still working on this?

I'm sure you can get plenty of help here but you will have to indicated a continued interest in solving the problem.

 

Prop.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
harold_kennedy
Posts: 29
Registered: ‎11-03-2012
Message 9 of 9 (805 Views)

Re: propeller

12-12-2012 04:06 AM in reply to: harold_kennedy

Hi,

I am definately still interested.Mike that is a excellent model and JD i would like to learn how to create (even start) on those blades..It will take me a little time but i would like to learn to model like that..

 

Cheers

 

Harold

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube