Re: iProp Wizard Preview - Comments Welcome

Anonymous · ‎11-12-2003

Wanted to show you all where I was on this project.

Take a look and give me your feedback. Suggestions? Comments? Do you want
more (please say no...)?

http://www.sdotson.com/iprop/iproppreview.html

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------

Anonymous · ‎11-12-2003

> Do you want
> more (please say no...)?

Well.... I'd acually like to have seperate options for iam's and ipt's.

Other than that, it looks very good.
Give me the seperate options, and I'll ditch my own homegrown program 😉

--
Jorgen Bjornes

----------------------------------------------
Visit the new and improved "Scandinavian Forum For Inventor" at
www.bjornes.org
Now completely popup-free and ad-free !
----------------------------------------------

Anonymous · ‎11-12-2003

I knew someone was going to ask for that....

Do you need separate list files for each file type as well?

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Jorgen Bjornes" wrote in message
news:oprykznxxpmpwhjz@localhost...
> > Do you want
> > more (please say no...)?
>
>
> Well.... I'd acually like to have seperate options for iam's and ipt's.
>
> Other than that, it looks very good.
> Give me the seperate options, and I'll ditch my own homegrown program 😉
>
>
> --
> Jorgen Bjornes
>
> ----------------------------------------------
> Visit the new and improved "Scandinavian Forum For Inventor" at
> www.bjornes.org
> Now completely popup-free and ad-free !
> ----------------------------------------------

Anonymous · ‎11-12-2003

On Thu, 13 Nov 2003 07:07:26 -0800, Sean Dotson
wrote:
> I knew someone was going to ask for that....
> Do you need separate list files for each file type as well?

ehemmm....... Yes, that would be preferable.
But not vital.

--
Jorgen Bjornes
----------------------------------------------
Visit the new and improved "Scandinavian Forum For Inventor" at
www.bjornes.org
Now completely popup-free and ad-free !
----------------------------------------------

Anonymous · ‎11-12-2003

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Jorgen Bjornes" wrote in message
news:opryk0swjempwhjz@localhost...
> On Thu, 13 Nov 2003 07:07:26 -0800, Sean Dotson
> wrote:
> > I knew someone was going to ask for that....
> > Do you need separate list files for each file type as well?
>
> ehemmm....... Yes, that would be preferable.
> But not vital.
>
>
>
> --
> Jorgen Bjornes
> ----------------------------------------------
> Visit the new and improved "Scandinavian Forum For Inventor" at
> www.bjornes.org
> Now completely popup-free and ad-free !
> ----------------------------------------------

Anonymous · ‎11-13-2003

I'd suggest getting a large check from Adesk and have them make this a
standard option in Iv (among other add-ins that's been written
out-of-Adesk).
Just my $0.02
Peer

Anonymous · ‎11-13-2003

Like this?

Check the page again at look at the 1st and 2nd images...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Jorgen Bjornes" wrote in message
news:opryk0swjempwhjz@localhost...
> On Thu, 13 Nov 2003 07:07:26 -0800, Sean Dotson
> wrote:
> > I knew someone was going to ask for that....
> > Do you need separate list files for each file type as well?
>
> ehemmm....... Yes, that would be preferable.
> But not vital.
>
>
>
> --
> Jorgen Bjornes
> ----------------------------------------------
> Visit the new and improved "Scandinavian Forum For Inventor" at
> www.bjornes.org
> Now completely popup-free and ad-free !
> ----------------------------------------------

Anonymous · ‎11-13-2003

Nice!!!

--
Hal Gwin
Mechanical Designer
Xenogen

W2K SP4
Dell Precision 650
Dual 2.66 GHz Xeon
1.5 GB DDR
Quadro4 900 XGL
nVidia 6.14.10.4472 w/registry update
Dell UltraSharp 19" LCD

Anonymous · ‎11-13-2003

Really cool, Sean!

> and will contain a checkbox to Replace Part# with
> Filename and mass and volume property readouts

Will the property readouts update automatically at
file saving?

And the language switch is still there! (I hope that's
no fake...)

--
Michael Puschner
www.scholle.de

"Sean Dotson" schrieb im Newsbeitrag
news:0AC955B8977160991681049027D65B65@in.WebX.maYIadrTaRb...
> Wanted to show you all where I was on this project.
>
> Take a look and give me your feedback. Suggestions? Comments? Do you
want
> more (please say no...)?
>
> http://www.sdotson.com/iprop/iproppreview.html
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html
> -----------------------------------------------------------------------
>
>

Anonymous · ‎11-13-2003

> Will the property readouts update automatically at file saving?

Not sure what this means...can you explain?

> And the language switch is still there! (I hope that's no fake...)

Actually.....the language portion last time took almost as long to do as the
rest of the program. I'm still not sure if I want to tackle that again. I
appreciated everyone's help but it was a royal PITA....

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Michael Puschner" wrote in message
news:8BDEA96DF94B543EC8F95533124E336B@in.WebX.maYIadrTaRb...
> Really cool, Sean!
>
> > and will contain a checkbox to Replace Part# with
> > Filename and mass and volume property readouts
>
> Will the property readouts update automatically at
> file saving?
>
> And the language switch is still there! (I hope that's
> no fake...)
>
> --
> Michael Puschner
> www.scholle.de
>
>
>
> "Sean Dotson" schrieb im Newsbeitrag
> news:0AC955B8977160991681049027D65B65@in.WebX.maYIadrTaRb...
> > Wanted to show you all where I was on this project.
> >
> > Take a look and give me your feedback. Suggestions? Comments? Do you
> want
> > more (please say no...)?
> >
> > http://www.sdotson.com/iprop/iproppreview.html
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > www.sdotson.com/faq.html
> > -----------------------------------------------------------------------
> >
> >
>
>

Anonymous · ‎11-13-2003

Maybe I don't understand what you mean with:
> and will contain a checkbox to Replace Part# with
> Filename and mass and volume property readouts
I understood, that you read the mass (or volume)
property and write it to the Part# property. I wanted
to know, what would happen, if the part is modified.
Will the new mass (or volume) property go to the
Part# property by itself?

You don't need to mess around with more than one
language. Just write the whole thing in German. *lol*
--
Michael Puschner
www.scholle.de

"Sean Dotson" schrieb im Newsbeitrag
news:1BC20EC831091F134E5D981ED4880DDE@in.WebX.maYIadrTaRb...
> > Will the property readouts update automatically at file saving?
>
> Not sure what this means...can you explain?
>
> > And the language switch is still there! (I hope that's no fake...)
>
> Actually.....the language portion last time took almost as long to do as
the
> rest of the program. I'm still not sure if I want to tackle that again.
I
> appreciated everyone's help but it was a royal PITA....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html

Anonymous · ‎11-13-2003

Sorry. It was the way I worded it.

It should have read:

"The runtime dialogue is not quite done and will contain a checkbox to
Replace Part# with the DisplayName.

It will also contain read-only mass and volume property readouts."

So no info is updated as save time. Only when you access the dialogue.

The native property names will still come in as native language properties.
(e.g. Part Number will be it's equivalent in German). It's the help files
and such that might not get translated. I'm considering a video help file
anyway so it will make more sense to those that don't speak English... or
like to read directions..

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Michael Puschner" wrote in message
news:7B5FD43A52279F282B2D8C1A4A3227C9@in.WebX.maYIadrTaRb...
> Maybe I don't understand what you mean with:
> > and will contain a checkbox to Replace Part# with
> > Filename and mass and volume property readouts
> I understood, that you read the mass (or volume)
> property and write it to the Part# property. I wanted
> to know, what would happen, if the part is modified.
> Will the new mass (or volume) property go to the
> Part# property by itself?
>
> You don't need to mess around with more than one
> language. Just write the whole thing in German. *lol*
> --
> Michael Puschner
> www.scholle.de
>
>
>
> "Sean Dotson" schrieb im Newsbeitrag
> news:1BC20EC831091F134E5D981ED4880DDE@in.WebX.maYIadrTaRb...
> > > Will the property readouts update automatically at file saving?
> >
> > Not sure what this means...can you explain?
> >
> > > And the language switch is still there! (I hope that's no fake...)
> >
> > Actually.....the language portion last time took almost as long to do as
> the
> > rest of the program. I'm still not sure if I want to tackle that again.
> I
> > appreciated everyone's help but it was a royal PITA....
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > www.sdotson.com/faq.html
>
>
>

Anonymous · ‎11-13-2003

Oh, it's my mistake! Forget about the mass
and volume thing. I had to read:

and will contain a checkbox to replace Part# with Filename
and *will contain* mass and volume property readouts

It really wouldn't make any sense to replace the Part# with
the mass property. And there are already tools that do this
with custom properties.

--
Michael Puschner
www.scholle.de

"Michael Puschner" schrieb im Newsbeitrag
news:7B5FD43A52279F282B2D8C1A4A3227C9@in.WebX.maYIadrTaRb...
> Maybe I don't understand what you mean with:
> > and will contain a checkbox to Replace Part# with
> > Filename and mass and volume property readouts
> I understood, that you read the mass (or volume)
> property and write it to the Part# property. I wanted
> to know, what would happen, if the part is modified.
> Will the new mass (or volume) property go to the
> Part# property by itself?
>
> You don't need to mess around with more than one
> language. Just write the whole thing in German. *lol*
> --
> Michael Puschner
> www.scholle.de
>
>
>
> "Sean Dotson" schrieb im Newsbeitrag
> news:1BC20EC831091F134E5D981ED4880DDE@in.WebX.maYIadrTaRb...
> > > Will the property readouts update automatically at file saving?
> >
> > Not sure what this means...can you explain?
> >
> > > And the language switch is still there! (I hope that's no fake...)
> >
> > Actually.....the language portion last time took almost as long to do as
> the
> > rest of the program. I'm still not sure if I want to tackle that again.
> I
> > appreciated everyone's help but it was a royal PITA....
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > www.sdotson.com/faq.html
>
>
>

Anonymous · ‎11-13-2003

Thank you Sean,
I just saw my misinterpretation.
See my other posting.
--
Michael Puschner
www.scholle.de

"Sean Dotson" schrieb im Newsbeitrag
news:94CC7E027FE615B08B388BBAFBC12501@in.WebX.maYIadrTaRb...
> Sorry. It was the way I worded it.
>
> It should have read:
>
> "The runtime dialogue is not quite done and will contain a checkbox to
> Replace Part# with the DisplayName.
>
> It will also contain read-only mass and volume property readouts."
>
> So no info is updated as save time. Only when you access the dialogue.
>
> The native property names will still come in as native language
properties.
> (e.g. Part Number will be it's equivalent in German). It's the help
files
> and such that might not get translated. I'm considering a video help file
> anyway so it will make more sense to those that don't speak English... or
> like to read directions..
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html

Anonymous · ‎11-13-2003

Yes, like that!
I hope its not too much extra coding (but I suspect it is).

--
Jorgen Bjornes

----------------------------------------------
Visit the new and improved "Scandinavian Forum For Inventor" at
www.bjornes.org
Now completely popup-free and ad-free !
----------------------------------------------

Anonymous · ‎11-16-2003

It would be nice to be able to specify a different master lists for each
customer.

Matt

iProp Wizard Preview - Comments Welcome

iProp Wizard Preview - Comments Welcome

Forums Links

Post to forums