that is normal. Do you have a key defined elsewhere such as part # or name?
--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Mark A. Bystry" wrote in message
news:D68B1D9F242BB6F38B6E3D6B6A3C7F7A@in.WebX.maYIadrTaRb...
> ...it's not a key by default. for instance, when we bring over the length
> parameter, a key icon is made. we click on the icon and by default, the
"Do
> Not Make a Key" is already checked...
>
> --
> Mark A. Bystry
> Engineer
> Ziggity Systems, Inc.
> mbystry@ziggity.com
> "Sean Dotson" wrote in message
> news:1E5E6C6A166C5E3B5D78AE21C5FC5A44@in.WebX.maYIadrTaRb...
> > Your custom property column cannot also be a key. Try that, if it still
> > doesn't work post it to CF and I'll have a look.
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Mark A. Bystry" wrote in message
> > news:0E2BA43983311A449C7ABA47CC0E9CD2@in.WebX.maYIadrTaRb...
> > > wait...now i get an error..."column or cell is tagged as both custom
> value
> > > and as key: #0"..."too few keys in the table". how do i prevent this?
> all
> > i
> > > have in the custom property field is the length of the pipe.
> > >
> > > --
> > > Mark A. Bystry
> > > Engineer
> > > Ziggity Systems, Inc.
> > > mbystry@ziggity.com
> > > "Drew Fulford" wrote in message
> > > news:1439E9E1A0F3605ED94598EDBB890E31@in.WebX.maYIadrTaRb...
> > > > Look into custom iParts AKA iPart Templates. Thats what you are
> > > describing.
> > > >
> > > > Read my FAQ 9407 for more info http://www.mymcad.com/
> > > >
> > > > I'm sure Sean has stuff on his site too. www.sdotson.com
> > > >
> > > > - drew
> > > > --
> > > > Drew Fulford B.A.Sc. Systems Engineer
> > > > Solid Caddgroup Inc. Burlington, Ontario
> > > > Tel: (905)331-9670, Fax: (905)331-7280
> > > > Corporate: http://www.solidcadcam.com/
> > > >
> > > > Member of the Autodesk Discussion Forum Moderator Program
> > > > Visit my MCAD website @
> > > >
> > > >
> > > > "Mark A. Bystry" wrote in message
> > > > news:F01A50ED1CB79843E9C4AAD490ADCA3D@in.WebX.maYIadrTaRb...
> > > > > when making an iPart of a rod with only varying lengths, is it
> > possible
> > > > when
> > > > > bringing it into an assy to type in a value for the length rather
> than
> > > > > creating it first in the table? creating lengths on the fly seems
> more
> > > > > productive than making like 100 predetermined sizes in a table.
> > > > >
> > > > > --
> > > > > Mark A. Bystry
> > > > > Engineer
> > > > > Ziggity Systems, Inc.
> > > > > mbystry@ziggity.com
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>