Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

chamfer won`t work

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
richard_cirillo
1664 Views, 2 Replies

chamfer won`t work

I am trying to place a 5mm chamfer along edge so as it meets the cylinder....i cannot get it to work on this model but on an exact other model i can place a 5mm chamfer...am i missing something here

 

thanks

Inventor 2013/Inventor 2014

2 REPLIES 2
Message 2 of 3

Hi!

 

The question is; you have two different distances, and somehow, Inventor has issues split/merge the face between these two distances when you apply chanfer (between extrusion and revolve).

 

1.png

 

Workaround:

  1. Create the extrusion as a new solid (now you have two solids; multisolid part)
  2. Create the chanfer with the distance you need in the second solid: extrusion.
  3. Use "combine" to join the two solids... and that's it.

Check the attached part.

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you!



Regards.
CCarreiras
Message 3 of 3

Thank you Carlos

 

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report