Inventor General Discussion

Reply
Active Member
ochivet
Posts: 9
Registered: ‎07-25-2007
Message 21 of 36 (227 Views)

Re: adsk file format

04-17-2009 01:30 AM in reply to: huycke
Hi All
Hello Patrick

I try to export an Inventor part with connection point throught the Adsk format to AutoCAD MEP.
Both software are 2010 version.

" BEFORE APPLYING YOUR PATCH "
In Inventor, I use the command "Environment->AEC exchange->Export Building Component" (hope the command are correctly translated, my menu is in french).
The enclosed adsk file is generated.

When I try to import the adsk file into AutoCAD MEP, it crash with a "fatal error: memory can't be read"
To do this, I use the command "Insert->Building Component (from "Content" Group)".
After selecting the file, a dialog appears asking me what I want to do with the file (Add as Multi-View Part, Multi-View Block or simple Block). The error occurs whatever the choice I do.

Regards

Olivier Chivet
TraceParts S.A.
Active Member
ochivet
Posts: 9
Registered: ‎07-25-2007
Message 22 of 36 (227 Views)

Re: adsk file format

04-17-2009 01:37 AM in reply to: huycke
Hi All
Hello Patrik

"AFTER INSTALLING THE PATCH"
I generated a new adsk file (enclosed).

Now When I try to insert it into AutoCAD MEP, the software doesn't crash, but I receive the following error (always after the dialog asking me what i want to do with the file) :
"The file "...adsk" is not a valid Autodesk exchange file"

Best regards
Olivier Chivet
TraceParts S.A.
Active Member
ochivet
Posts: 9
Registered: ‎07-25-2007
Message 23 of 36 (227 Views)

Re: adsk file format

04-17-2009 03:35 AM in reply to: huycke
Patrick

I forgot to tell you my OS is XPSP2 64-bit
So Inventor and AutoCAD MEP is 64-bit version too.

Regards
Olivier Chivet
TraceParts S.A.
Active Member
stefan.lindberg
Posts: 9
Registered: ‎10-18-2007
Message 24 of 36 (227 Views)

Re: adsk file format

04-17-2009 03:42 AM in reply to: huycke
Hi there!
Now we have tried with the hotfix installed and it works fine! I've tryed Revit Architecture and it imports the ADSK file without problems.
I attach 2 simple ADSK test files that works for me in Revit so you can try if you like.


/Stefan Lindberg CAD-Q Sweden
Active Member
stefan.lindberg
Posts: 9
Registered: ‎10-18-2007
Message 25 of 36 (227 Views)

Re: adsk file format

04-17-2009 03:45 AM in reply to: huycke
Here comes the other file...
It's an simple table that is upside down (so there is nothing wrong with it... :-) )

We will try to do some more complicated modells later on ...
Active Member
ochivet
Posts: 9
Registered: ‎07-25-2007
Message 26 of 36 (227 Views)

Re: adsk file format

04-17-2009 03:52 AM in reply to: huycke
Hi All
Hello Stefan

From my side, there is no change.
I tried your two adsk files, and I always receive the error "The file ...adsk is not a valid Autodesk Exchange file" in AutoCAD MEP 2010.

Regards.
Olivier Chivet
TraceParts S.A.
Active Member
stefan.lindberg
Posts: 9
Registered: ‎10-18-2007
Message 27 of 36 (226 Views)

Re: adsk file format

04-17-2009 04:12 AM in reply to: huycke
I've tryed them in AutoCAD Architecture and I get the same error as you!

"The file xxxx.adsk is not a valid AutoDesk exchange file."

But in Revit Architecture they import nicely!!

There must be something for AutoDesk to fix in AutoCAD based products like MEP and Architecture because it seemse to work fine in Revit based products...


/Stefan
Active Member
stefan.lindberg
Posts: 9
Registered: ‎10-18-2007
Message 28 of 36 (226 Views)

Re: adsk file format

04-17-2009 04:12 AM in reply to: huycke
I've tryed them in AutoCAD Architecture and I get the same error as you!

"The file xxxx.adsk is not a valid AutoDesk exchange file."

But in Revit Architecture they import nicely!!

There must be something for AutoDesk to fix in AutoCAD based products like MEP and Architecture because it seemse to work fine in Revit based products...


/Stefan
Employee
garin
Posts: 147
Registered: ‎11-13-2006
Message 29 of 36 (226 Views)

Re: adsk file format

04-17-2009 08:58 AM in reply to: huycke
We have just released a Hotfix to clear up this issue. If you are saving an ADSK file from AEC Exchange and try to open it in Revit or AutoCAD Architecture you will get an error unless you install this Hotfix.

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=13105818&linkID=9242019

Edited by: garin on Apr 17, 2009 3:58 PM Edited by: garin on Apr 17, 2009 3:58 PM
Active Member
ochivet
Posts: 9
Registered: ‎07-25-2007
Message 30 of 36 (226 Views)

Re: adsk file format

04-17-2009 09:30 AM in reply to: huycke
Hello garin

I installed the hotfix and generate a new adsk file.
I receive an error when I try to import the file into AutoCAD MeP 2010 x64 (see enclosed picture)

When do you think it could be possible to import the adsk file into MEP ?

Best regards
Olivier Chivet
TraceParts S.A.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube