Inventor General Discussion

Reply
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 1 of 9 (261 Views)
Accepted Solution

adding color

261 Views, 8 Replies
10-06-2012 02:50 PM

Hi,

 

I have some shapes in which i want to add solid color to sections.I cannot find anywhere to accomplish this effect.Can this be done in Inventor 2013..it will be a 2D view

Please view the attached 2013 file...can this be done

 

Rich

*Expert Elite*
JDMather
Posts: 26,354
Registered: ‎04-20-2006
Message 2 of 9 (252 Views)

Re: adding color

10-06-2012 04:49 PM in reply to: richard_cirillo

If it is 2D - why aren't you creating the sketch in idw or dwg?

 

http://forums.autodesk.com/t5/AutoCAD-2013/symbols/td-p/3649346

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 3 of 9 (241 Views)

Re: adding color

10-06-2012 06:34 PM in reply to: JDMather

I use Inventor much more then Autocad (new) so if possible would rat5her do in Inventor

 

Thanks

 

Rich

*Expert Elite*
JDMather
Posts: 26,354
Registered: ‎04-20-2006
Message 4 of 9 (223 Views)

Re: adding color

10-07-2012 04:43 AM in reply to: richard_cirillo

If it is 2D - why aren't you creating the sketch in Inventor idw or Inventor dwg?

Sketched Symbols might be the way to go.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 5 of 9 (215 Views)

Re: adding color

10-07-2012 05:02 AM in reply to: richard_cirillo

Thanks..

Yes you are correct....can the title block be removed from the bottom right hand corner

 

Rich

*Expert Elite*
JDMather
Posts: 26,354
Registered: ‎04-20-2006
Message 6 of 9 (212 Views)

Re: adding color

10-07-2012 05:15 AM in reply to: richard_cirillo

Yes.

Right mouse button in browser.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 7 of 9 (209 Views)

Re: adding color

10-07-2012 05:19 AM in reply to: JDMather

JD Thank you

 

1 final question....can the shapes be filled in with solid colors

 

Rich

*Expert Elite*
JDMather
Posts: 26,354
Registered: ‎04-20-2006
Message 8 of 9 (207 Views)

Re: adding color

10-07-2012 05:22 AM in reply to: richard_cirillo

Yes.

Hatch/Color Fill.   (Fill/Hatch Region)

....and why do I doubt this is the final question?   :smileysurprised:

 

Solid Hatch.PNG

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 9 of 9 (203 Views)

Re: adding color

10-07-2012 05:25 AM in reply to: JDMather

It is as i also just found it

 

Rich

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube