Inventor General Discussion

Reply
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 1 of 9 (267 Views)
Accepted Solution

adding color

267 Views, 8 Replies
10-06-2012 02:50 PM

Hi,

 

I have some shapes in which i want to add solid color to sections.I cannot find anywhere to accomplish this effect.Can this be done in Inventor 2013..it will be a 2D view

Please view the attached 2013 file...can this be done

 

Rich

*Expert Elite*
JDMather
Posts: 26,525
Registered: ‎04-20-2006
Message 2 of 9 (258 Views)

Re: adding color

10-06-2012 04:49 PM in reply to: richard_cirillo

If it is 2D - why aren't you creating the sketch in idw or dwg?

 

http://forums.autodesk.com/t5/AutoCAD-2013/symbols/td-p/3649346

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 3 of 9 (247 Views)

Re: adding color

10-06-2012 06:34 PM in reply to: JDMather

I use Inventor much more then Autocad (new) so if possible would rat5her do in Inventor

 

Thanks

 

Rich

*Expert Elite*
JDMather
Posts: 26,525
Registered: ‎04-20-2006
Message 4 of 9 (229 Views)

Re: adding color

10-07-2012 04:43 AM in reply to: richard_cirillo

If it is 2D - why aren't you creating the sketch in Inventor idw or Inventor dwg?

Sketched Symbols might be the way to go.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 5 of 9 (221 Views)

Re: adding color

10-07-2012 05:02 AM in reply to: richard_cirillo

Thanks..

Yes you are correct....can the title block be removed from the bottom right hand corner

 

Rich

*Expert Elite*
JDMather
Posts: 26,525
Registered: ‎04-20-2006
Message 6 of 9 (218 Views)

Re: adding color

10-07-2012 05:15 AM in reply to: richard_cirillo

Yes.

Right mouse button in browser.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 7 of 9 (215 Views)

Re: adding color

10-07-2012 05:19 AM in reply to: JDMather

JD Thank you

 

1 final question....can the shapes be filled in with solid colors

 

Rich

*Expert Elite*
JDMather
Posts: 26,525
Registered: ‎04-20-2006
Message 8 of 9 (213 Views)

Re: adding color

10-07-2012 05:22 AM in reply to: richard_cirillo

Yes.

Hatch/Color Fill.   (Fill/Hatch Region)

....and why do I doubt this is the final question?   :smileysurprised:

 

Solid Hatch.PNG

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
richard_cirillo
Posts: 79
Registered: ‎08-28-2012
Message 9 of 9 (209 Views)

Re: adding color

10-07-2012 05:25 AM in reply to: JDMather

It is as i also just found it

 

Rich

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.