Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wrong thread depth in the note

4 REPLIES 4
Reply
Message 1 of 5
Karol-Or
547 Views, 4 Replies

Wrong thread depth in the note

In the drawing, i annotate a thread. the automatic text for thread depth is always, as far as i see, incorrect, for example if the thread depth is 50 it writes, i don't remeber, but something like 250.

Maybe it has to do with the font, altough i doubt. i am in israel, and the quantity of threads, also an automatic text, is written backwards, for example 4x instead of x4.

Maybe the added zero ot the depth is somehow related, maybe attached.

 

4 REPLIES 4
Message 2 of 5
Cadmanto
in reply to: Karol-Or

Karol,

I have been to Israel.  You have a beautiful country.  Easy to see why it is God's country.

 

In regards to your issue, what standards system are you using?  Can you post some images of your hole settings

and then what you are seeing in your drawing?

If you posted attached files the first time, they didn't come through.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

 

New EE Logo.PNG

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Message 3 of 5
Anonymous
in reply to: Karol-Or

Could attach the files?

Message 4 of 5
blair
in reply to: Karol-Or

If you are using a "Drill-Point" type hole, it will give you the "travel-depth" of the drill bit and not just the threads. If you start your hole above the part surface from a work-plane, it will give you the depth from the work-plane as well.


Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 5 of 5
Paul-Mason
in reply to: Karol-Or

I've had a similar problem with counter bored holes on the inside of a cicular part, where I have had to create a work plane to place them the dimention then measures from the work-plane it was created on and not the actual face

==============
Inventor 2023 Pro
HP Z420 workstation
Xeon 3.7Ghz CPU 8 Cores, 64 GB Ram
64bit (The Garbage known as) Windows 10 Pro
AMD FirePro V3900 (ATI FireGL) (1GB RAM)
=================
Ashington Northumberland (UK) ~ Home to the WORLD FAMOUS Pitman Painters Group

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report