Inventor General Discussion

Reply
Active Contributor
tap90291
Posts: 39
Registered: ‎08-28-2003
Message 1 of 4 (41 Views)

Which cpu for inventor

41 Views, 3 Replies
11-05-2002 12:21 AM
I am upgrading a machine and I am not sure which way to go P4 2.4 533 fsb or AMD XP 2400 (1.93 mhz) 266 fsb. Which one will be noticably quicker if at all.

Thanks in advance

TAP
*Bilton, John
Message 2 of 4 (41 Views)

Re: Which cpu for inventor

11-05-2002 12:54 AM in reply to: tap90291
For single CPU, a P4 will probably be faster. If you are going for a multiple processor system then
the AMD architecture with shared data cache is a lot more efficient at spreading the data over
multiple CPU's and is therefore faster (IMHO).


John Bilton
--
"It seemed like a good idea at the time..."
*Autodesk, John Elliott -
Message 3 of 4 (41 Views)

Re:

11-05-2002 07:49 AM in reply to: tap90291
You can probably get a dual AMD for much less. I would pack it with as much
memory (even 3GB) as you can afford. Perhaps by a large EIDE drive instead
of a SCSI. Putting all of the data locally is a big plus.

The dual processors come into use when you are making drawings. precise.

John

"John Bilton" wrote in message
news:8846AE87AE3DD4D8E5C490BDA8F7F353@in.WebX.maYIadrTaRb...
> For single CPU, a P4 will probably be faster. If you are going for a
multiple processor system then
> the AMD architecture with shared data cache is a lot more efficient at
spreading the data over
> multiple CPU's and is therefore faster (IMHO).
>
>
> John Bilton
> --
> "It seemed like a good idea at the time..."
>
>
*Corbin, Brian
Message 4 of 4 (41 Views)

Re:

11-05-2002 09:44 AM in reply to: tap90291
I looked at a dual AMD setup but all the motherboards only support 266MHZ
RAM which is a little old now....

"John Elliott - Autodesk" wrote in message
news:F627B9BD8138E6C1BFE8F4F5D41E1C0C@in.WebX.maYIadrTaRb...
> You can probably get a dual AMD for much less. I would pack it with as
much
> memory (even 3GB) as you can afford. Perhaps by a large EIDE drive instead
> of a SCSI. Putting all of the data locally is a big plus.
>
> The dual processors come into use when you are making drawings. precise.
>
> John
>
> "John Bilton" wrote in message
> news:8846AE87AE3DD4D8E5C490BDA8F7F353@in.WebX.maYIadrTaRb...
> > For single CPU, a P4 will probably be faster. If you are going for a
> multiple processor system then
> > the AMD architecture with shared data cache is a lot more efficient at
> spreading the data over
> > multiple CPU's and is therefore faster (IMHO).
> >
> >
> > John Bilton
> > --
> > "It seemed like a good idea at the time..."
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube