Inventor General Discussion

Reply
New Member
offsite
Posts: 2
Registered: ‎03-22-2013
Message 1 of 4 (558 Views)
Accepted Solution

Weld Round bar to Square Hollow Section

558 Views, 3 Replies
03-22-2013 11:19 PM

Hi all

 

I am wondering can somebody help me out with this issue. I have a solid bar which has a diameter equal to the nternal dimensions of a SHS. I am trying to create a weld, basically to fill the gap with a weld. I tried a similar arrangement with a  Circular Hollow Section and it worked perfectly. I have tried fillet and groove for the SHS but it will not accept it.

 

Any suggestions?

 

Thanks in advance

Padraig

*Expert Elite*
blair
Posts: 3,964
Registered: ‎11-13-2006
Message 2 of 4 (521 Views)

Re: Weld Round bar to Square Hollow Section

03-23-2013 08:51 AM in reply to: offsite

I had to use 2 groove welds to fill the gap between the ID of the tup and the shaft, I selected the two corners and the side and used the direction towards the other side, then did the same with the oposite side to produce a smooth top surface, then the corner fillet weld. Also it was showing a fillet with a bead of 20mm. A little to big to this end.

 

Capture3.PNG

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
New Member
offsite
Posts: 2
Registered: ‎03-22-2013
Message 3 of 4 (485 Views)

Re: Weld Round bar to Square Hollow Section

03-24-2013 05:20 PM in reply to: blair

That's perfect, it is exactly what I was looking for!

 

Thanks for your help, much appreciated.

 

Regards

Padraig

Valued Mentor
jeanchile
Posts: 722
Registered: ‎11-10-2009
Message 4 of 4 (477 Views)

Re: Weld Round bar to Square Hollow Section

03-24-2013 05:55 PM in reply to: offsite
There is an example of this exact weld configuration in Curtis Waguespack's Mastering Inventor books. I'm pretty sure by using the controls of just the fillet weld command you can get this to work exactly as it would be welded in the shop. I'm on my phone right now so I can't try it but if you buy his book you won't be disappointed.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube